Replacement Pins for Arms of Roadmaster Sterling Tow Bar part # RM-576

Question

Question:

need replacement hitch pin for sterling tow bar and EZ5 base plate

asked by: Steve

1

Helpful Expert Reply:

Sounds like you are looking for the replacement pins that go from the arms of the Roadmaster Sterling tow bar part # RM-576 to the base plate kit which for that you'd need the # RM-910029.

expert reply by: Jameson C

1

Answer 1

The correct lynch pins to use with the Roadmaster Hitch Pin for Roadmaster Jeep D-Ring Bumper Mount Tow Bar Adapters #RM-910044 is the #RM-910024. These are sold in a pair.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

For your 2014 Nissan Versa Note you will need: -A base plate, like the Roadmaster Direct-Connect Base Plate Kit #RM-52357-5, -A set of tow bars, like the Roadmaster Falcon All-Terrain Tow Bar #RM-522, -A braking system, like the Blue Ox Patriot Radio…

view full answer...

Answer 5

Thanks for the pictures and all the information! Since you have the Falcon 2 Tow bar you can use the Roadmaster Direct-Connect Base Plate Kit item #RM-52927-5 you were looking at and get rid of the crossbar. This kit is confirmed to fit your 2022…

view full answer...

Answer 6

Yep, we have both of those things for your 2024 Jeep Wrangler JLU. For the second vehicle kit for your Demco Air Force One #SM99243 you need the following part: - Second Vehicle Kit for Demco Air Force One Flat Tow Brake System #SM99209 Then for tow…

view full answer...

Answer 7

Yes, the Roadmaster base plate kit part #RM-521453-5 does fit the 2024 Jeep Rubicon X 4xe with the factory steel bumper with the factory winch. We had a customer with this exact setup and they informed us it fit and worked great.

view full answer...

Answer 8

You're welcome and thanks again for the pictures! The connector inside your RV is called an OBD2 port and it's used for inspections and other diagnostics. It does not work with anything towing related or a brake system like the Roadmaster…

view full answer...

Answer 9

I recommend starting by removing your Greystone RV Curved Electric Fireplace #GR54FR from the wall/cabinet and disconnecting it from its power source. While it's unplugged blow out the vents with a can of compressed air to remove any dust/debris…

view full answer...

Answer 10

Roadmaster is a great choice when it comes to flat towing any vehicle; here are some of my recommendations to get you out on the road: Baseplate: Roadmaster Direct-Connect Base Plate Kit #4410-3. Tow Bar: etrailer XHD Non-Binding Tow Bar for…

view full answer...

Replacement Pins for Arms of Roadmaster Sterling Tow Bar part # RM-576

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching