Mounting Bracket that Can be Used with Roadmaster Diode Tow Bar Wiring Kit RM-154

Question

Question:

I bought a RM-154 wiring kit. where is the bracket to hold the end of the wire loom. that plugs into your towing vehicle?

asked by: Glenn C

0

Expert Reply:

The Roadmaster diode kit part # RM-154 does not come with a mounting bracket for the 4-way connector so for that the # 18144 would be a great option. This would attach to a metal surface with included hardware and would hold the 4-way when not in use.

expert reply by: Jameson C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the 1-1/2" Square…

view full answer...

Answer 4

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 5

Based on the information I could find the Samsung MR1031UWC is a countertop style microwave that is 20-11/32" wide, 13-11/32" tall and 14-5/8" deep. Currently we only have over the range and built in style microwaves. If your microwave…

view full answer...

Answer 6

Hey Roger, yes you could remove the trim of the High Pointe Built In Microwave part #HP84ZR and it could sit on a counter top like you asked about. The dimensions listed for it are correct for without the trim kit: 19" W x 11.375" H x…

view full answer...

Answer 7

I would be happy to confirm the parts you referenced fit your 2019 Chevy Colorado and are compatible together. I have listed them below, along with any changes, and attached installation videos. Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar…

view full answer...

Answer 8

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 9

Hey Michael, The Falcon 5250 has direct-connect attachment points that hook onto a crossbar, if you remove the crossbar adapter then you'll be able to go with a direct-connect baseplate like the #RM77ZR (models with tow hooks) or #RM76RR (models…

view full answer...

Answer 10

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 11

I believe you're talking about the Furrion Propane RV Built-in Wall Oven #FSRD22LASS. This is 20-11/16" tall but the width is more than you can fit at 24-3/4" wide. These are the same dimensions as the Furrion Electric RV Built-in Wall…

view full answer...

Answer 12

If you check out the attached picture you can see where you'll find the serial number and date code on your cover.

view full answer...

Mounting Bracket that Can be Used with Roadmaster Diode Tow Bar Wiring Kit RM-154

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching