Grille Guard that Fits 2022 Ford F-350 with Front Cameras and Sensors

Question

Question:

Is this compatible with parking sensors, front camera, an adaptive cruise control?

asked by: Marcos L

0

Expert Reply:

We have a Westin HDX grille guard that fits your 2022 Ford F-350 and is compatible with parking sensors, front cameras, and adaptive cruise with the part # W55AQ but this is only one that is compatible. The Sportsman you mentioned would interfere so I would recommend the HDX.

expert reply by: Jameson C

0

Answer 1

Yes, the Adarac Aluminum M-Series Custom Truck Bed Ladder Rack #A62FR is going to be compatible with the BAK Revolver X4s Hard Tonneau Cover #BAK89ZR on your 2023 Ford F-150. For a bike rack it will really come down to which type of carrier you…

view full answer...

Answer 2

The Westin HDX Grille Guard with Punch Plate - Black Powder Coated Steel. part #W55AQ. will fit your vehicle. You may have to make some modifications for it to fit your vehicle. I have included pictures from the installation manual that shows these…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 7

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 8

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and manufactured…

view full answer...

Answer 9

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 10

According to my research, your 92865A-1 hub/drum has a 25580 inner and an 14125A outer bearing and a 8 on 6-1/2 inch lug pattern, as does the AxleTek #AKHD-865-7-2-K hub drum you referenced. The #AKHD-865-7-2-K would be an acceptable replacement for…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

Grille Guard that Fits 2022 Ford F-350 with Front Cameras and Sensors

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching