Diameter of the Replacement Hand Sprayer for Dometic RV Toilets

Question

Question:

on the sprayer hose dimension. is it 1/2

asked by: Ron C

1

Helpful Expert Reply:

I was able to go out to the warehouse and measure the Replacement Hand Sprayer for Dometic RV Toilets # DOM88FR. It has an outer diameter of .5" or 1/2" and an inner diameter of .35" or 11/32".

expert reply by: Scott S

1

Answer 1

Yes, the Replacement Hand Sprayer for Dometic RV Toilets #DOM88FR will also work for your SeaLand Traveler model 910 RV toilet.

view full answer...

Answer 2

The Timbrens part #TDR1500DQ that you referenced are designed to do exactly what you are looking for. These will help support additional weight on the front suspension of a vehicle like a snow plow, or in your case a heavy front bumper. I attached an…

view full answer...

Answer 3

The Dometic 320 Full-Timer RV Toilet #DOM87FR would install pretty easily in place of your Sealand Model 111 without major modifications, I would consider it a "drop-in" install. You can add a hand sprayer too with the Hand Sprayer…

view full answer...

Answer 4

Yes, so long as you have a Dometic toilet you can replace the hand sprayer and hose with the following part number: - Replacement Hand Sprayer for Dometic RV Toilets #DOM88FR

view full answer...

Answer 5

The Victory Step Manual Fold-Down Steps for RV and Toy Hauler Patios - Quadruple - Aluminum #LC726895 you asked about will only allow for about 3 inches from the edge. For your application you would either need to add a piece that is hinged to flip…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Diameter of the Replacement Hand Sprayer for Dometic RV Toilets

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching