Weight Of Draw-Tite Front Mount Trailer Hitch Receiver # 65001

Question

Question:

How much does the hitch itself weigh?

asked by: NORMAN W

0

Expert Reply:

The Draw-Tite Front Mount Trailer Hitch Receiver # 65001 weighs 38lbs. This custom fit receiver is confirmed to fit the 1991 - 2007 Ford Van E-150, E-250, and E-350; 1991 - 2007 Ford Van E-350 RV Cutaway; 2000 - 2007 Ford Van E-450 RV Cutaway.

expert reply by: Bud M

0

Answer 1

For your 2005 Ford E-350, whether it is a cutaway or the van I recommend the Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2" #65001. This confirmed fit front mounted hitch receiver is an easy installation that has a 9,000 lb line…

view full answer...

Answer 2

It's possible you might not be trying to install the hitch into the right holes. The cut out portion of the mounting flange of the Curt Front Hitch part #33055 should align with the hump in the frame. However, we had one customer have a similar…

view full answer...

Answer 3

In order to determine which is the correct front mounted trailer hitch for your motorhome (if available), I would need to know either the year, make, model, and floor plan of your motorhome or the year, make, and model of the chassis your motorhome…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

The Stealth Hitches Hidden Rack Receiver item #391KIATELL20 you were looking at would be a great option if you do not want to see the hitch at all when you're not using your Yakima EXO system. It has been confirmed to fit the 2023 Kia Telluride…

view full answer...

Answer 10

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 11

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Weight Of Draw-Tite Front Mount Trailer Hitch Receiver # 65001

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching