BOLT Receiver Lock Fit For 2022 Jeep Wrangler JL

Question

Question:

2022 Jeep Wrangler JL. Do you have one that fits my model Jeep? Thanks

asked by: AJ C

0

Expert Reply:

Yes, there is a BOLT receiver lock for your 2022 Jeep Wrangler JL, so long as your key looks like one of the keys in the photo below. If it does, there are options for a 1-1/4" and 2" hitch:

- 1-1/4" Hitch: BOLT Receiver Lock # BL7032293

- 2" Hitch: BOLT Receiver Lock # BL7032290

expert reply by: Kyle S

0

Key Should Look Like This For 2022 Jeep Wrangler JL
(click to enlarge)

Answer 1

Thanks so much for the photos they were super helpful, and what you have is a 7-way on the RV and 7-way on your Jeep, and we do have one option for an extension cord that will work for you: - Curt Tow Bar Extension Cord w/ Socket - Coiled - 7-Way…

view full answer...

Answer 2

A 5/8" diameter hitch pin is usually made of steel, though some have coatings applied to help resist corrosion. For example, the Master Lock Pivot Lock Hitch Pin for 2" Hitches #ML1465DAT is made of stainless steel, but there is…

view full answer...

Answer 3

To get the wiring configuration you're wanting you'll need to install the T-One Vehicle Wiring Harness #118786 on your 2021 Jeep Wrangler Unlimited. This gives you a 4-Way with the standard trailer light circuits. Then from here we…

view full answer...

Answer 4

I do believe you are looking for the Curt Mounting Bracket for 7-Way Connector Plug #C67UR. Or the Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long #C57202. These will let you connect and hold any loose wire…

view full answer...

Answer 5

To get a 7-way for your 2020 Jeep Wrangler 2 door, you will start with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #118786 and then add the Adapter kit #ETBC7. The 4-way wiring will connect to your factory wiring, and then…

view full answer...

Answer 6

For your 2022 Jeep Wrangler, the only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish #e98856 and the Curt Hitch #C13392 is that the Curt hitch comes with a higher-quality gloss outer coating over the base…

view full answer...

Answer 7

I would not go with a gooseneck hitch if you want to tow a 5th wheel trailer because then you would need an adapter and it just adds more cost and components to the set up. The flat bed is a good idea, you just need a hitch that can be installed on…

view full answer...

Answer 8

I measured the bolt that is included in the Yakima Replacement parts kit #Y8780022 and found it has the following dimensions: Overall Length 4-5/8 Hex Head Size 13/16 Thread diameter 1/2 Length of Thread 2-1/2 I prepared a photo with these…

view full answer...

Answer 9

You can key the Yakima HitchLock, part #Y07235, the same as the Yakima SKS key you have now. What you will need to do is get the lock number that is stamped on the front of the Yakima lock cylinder that you already have and enter that lock number in…

view full answer...

Answer 10

All base plates are going to require you to trim the belly pan of your 2021 Jeep Gladiator - Rubicon. The only way to avoid that would be if you had a bumper with D-Ring Mounts that was rated to flat tow your vehicle. The Roadmaster Direct-Connect…

view full answer...

Answer 11

There is not a trailer coupler lock with a cover for when the coupler is attached to your trailer; the only option for a lock in that instance is indeed a pin lock. If you are okay going that route, use the Adjustable Trailer Coupler Latch Lock -…

view full answer...

Answer 12

The Roadmaster BlackHawk 2 All Terrain #RM-422 does not come with safety cables. You would need The Roadmaster 80 inch Coiled Safety Cables - Double Hook - 10,000 lbs - Qty 2 #RM-653. I have attached a review video link below.

view full answer...

BOLT Receiver Lock Fit For 2022 Jeep Wrangler JL

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching