Trailer Coupler Lock For When Trailer is Attached

Question

Question:

I am looking for a trailer coupler lock for a coupler attached to a ball, with a cover, not just a pin lock

asked by: Joe P

0

Expert Reply:

There is not a trailer coupler lock with a cover for when the coupler is attached to your trailer; the only option for a lock in that instance is indeed a pin lock. If you are okay going that route, use the Adjustable Trailer Coupler Latch Lock - 1/2" to 2-1/2" Span # e98883.

expert reply by: Kyle S

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…

view full answer...

Answer 6

We don't have an option that will allow for all of them to be keyed alike but I can get you down to one key for the hasp locks and another for the coupler lock. The Trimax Puck Locks for Trailer Door Hasps #TMX73FR comes with three keyed-alike…

view full answer...

Answer 7

Personally I prefer the Demco Trailer Coupler #DM14976-52 with the composite handle over the Coupler #DM15791-81 with a metal handle. I feel it is easier to operate as it does not have the safety latch like you get on the metal handle. Since most…

view full answer...

Answer 8

Yes, the etrailer.com Adjustable Trailer Coupler Latch Lock #e98883 that you referenced can be keyed alike. Once on the product page simply select "Keyed Alike" from the drop-down menu and all 4 locks you receive will use the same key.

view full answer...

Answer 9

When it comes to The Fastway Trailer Hitch Receiver Lock - 2 inch Hitches - 5/8 inch Diameter - Qty 1 #FA86-00-3050 can be keyed alike. You would have to purchase the receiver lock first then when you receive the part get the key number. Then you…

view full answer...

Answer 10

For a waterproof cover on your utility trailer, I recommend the Erickson Heavy-Duty Silver Tarp, 14 x 14 Weave - 8' x 10' #EM57021.

view full answer...

Answer 11

The bolts for channel mount coupler #CTA-280 have the markings for grade 8 bolts. They are 5/8 inch coarse threaded bolts so the minimum torque value is 159 and the max is 212 (foot pounds). Once torqued down the force will cause the metal of the…

view full answer...

Answer 12

I have an excellent option for you which includes a hitch pin lock for the trailer hitch (1-1/4" and 2"), a pin lock for the coupler, and a wraparound lock for the coupler (1-7/8", 2", and 2-5/16"). This lock set will all use…

view full answer...

Trailer Coupler Lock For When Trailer is Attached

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching