Wheel and Tire Sizes Compatible With The RockyMounts GuideRail Bike Rack

Question

Question:

What size bike tires will fit this bike rack and will I need an adapter for certain wheels?

asked by: Jay

0

Expert Reply:

The RockyMounts GuideRail Bike Rack # RKY97ZR is capable of holding bikes with tires up to 3" wide and a wheel diameter of 20-29". It can hold 2 bikes up to 60lbs per bike and a maximum wheel base of 55". You will not need an adapter to use this rack with any tires that fit inside these wheel dimensions.

expert reply by: Bud M

0

Answer 1

Absolutely, and the best trailer hitch receiver for your 2023 Toyota Venza is going to be either the Curt or etrailer hitch. I mention both because they are the same hitch, just with different finishes - the Curt has a glossy finish while the…

view full answer...

Answer 2

The shank on the RockyMounts BackStage, part #RKY10002 has the following dimensions from the center of the hitch pin hole: To the end of the shank: 2-1/2 inches To the nearest part of the carrier when folded down: 9-1/2 inches To the nearest part…

view full answer...

Answer 3

I do have an option for you but the RockyMounts GuideRail Bike Rack part #RKY97ZR is a wheel mount rack so it won't work with your Aventon Level 2 Step Thru and Specialized Como Step Thru as they both have fenders and you can't use a wheel…

view full answer...

Answer 4

I am assuming you meant Yakima Holdup part #Y02443 as there isn't a Standup bike rack they offer. This is a pretty similar bike rack to the Curt E-Bike Rack part #C89JR in a few ways as they are both platform racks that use wheel mounts to secure…

view full answer...

Answer 5

I have a solution but there is not a ramp available for the Backstage part #RKY10002. I also looked at the available ramps and didn't see any that would easily work. If you would like to upgrade the rack along with the bikes the Thule EasyFold XT…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 9

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 10

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 11

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 12

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Wheel and Tire Sizes Compatible With The RockyMounts GuideRail Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching