Correct Size Hitch Cap Sensor for GMC MultiPro and Chevy Multi-Flex for a 2022 GMC Sierra 2500

Question

Question:

2022 GMC Sierra 2500HD

asked by: Gerry

0

Expert Reply:

The correct size Hitch Cap Sensor for GMC Sierra MultiPro and Chevy Silverado Multi-Flex Tailgates for a 2022 GMC Sierra 2500 is part # C36UR. It doesn't matter if you're using a reducer sleeve.

I have attached a review video I did on this product below.

expert reply by: Conner L

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hi Robert, The Curt Pintle Hook #C45908 would require that your EZ Loader boat trailer has a lunette ring for the coupler. From what I can see the 26-30ET should have a surge brake coupler that would couple to a standard ball mount. You'll need…

view full answer...

Answer 4

The overall height of the Timbren Spring Kit part #TGMRCK25D is 6-1/4 inches.

view full answer...

Answer 5

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 6

Based on how tight of clearance there is between the MultiPro tailgate and the rear hitch of the new Chevy trucks fixed ball mounts won't have the needed clearance. Instead you would need to go with a B and W Tow and Stow designed for this…

view full answer...

Answer 7

We do have the hitch cap sensor #C37VV which is for the 2019-2023 GMC Sierra with a 2-1/2" hitch. Unfortunately we have not confirmed this for the 2024 models yet. We are not aware of any changes to the vehicle harness, but we cannot guarantee a…

view full answer...

Answer 8

My recommendation would be to go with a roll-up tonneau cover. It is less obtrusive than a tri-fold option. My recomendation is the BAK Revolver X4s Hard Tonneau Cover - Roll Up - Aluminum and Vinyl - Matte Black, part #BAK22VR. This tonneau cover is…

view full answer...

Answer 9

The Trailer Hitch Receiver Lock for 3" Hitches #BW23FR has a 5/8" diameter so it can be used for 2", 2-1/2", and 3" trailer hitch receivers. The 3-1/8" span makes it fit with up to 3" hitches though, which is why we…

view full answer...

Answer 10

Yes, it looks like you did your math correctly! The B&W Tow & Stow 3-Ball Mount #BWTS20067BMP for a 2-1/2" receiver you were looking at is an excellent choice due to the versatility is has to offer plus it's compatible with the GM…

view full answer...

Correct Size Hitch Cap Sensor for GMC MultiPro and Chevy Multi-Flex for a 2022 GMC Sierra 2500

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching