2 Bike Rack for a 2019 Toyota RAV4 That Does Not Use a Hitch

Question

Question:

Hello, I am looking for a bike rack for my RAV4 2019 limited. Not for a hitch. Just something I can carry two bikes with some sort of harnes. Do you have something that is compatible with my vehicle? Thank you

asked by: Javier S

0

Expert Reply:

We have a great option that fits your 2019 Toyota RAV4 and will allow you to carry 2 bikes that does not use a hitch. The Yakima FullBack 2 Bike Rack # Y02634 is a trunk mount style bike rack that fits your 2019 Toyota RAV4 and will allow you to carry 2 bikes weighing up to 35 lbs. per bike.

expert reply by: Scott S

0

Answer 1

For your 2022 Toyota RAV4, I recommend the Yakima FullBack 2 Bike Rack #Y02634. This carrier is the lightest option we carry for a two bike rack, weighing in at only 21-lbs, and is capable of carrying two bikes weighing 35-lbs each, for a total of…

view full answer...

Answer 2

The Yakima Fullback for 3 bikes #Y02633 is a great choice for your Toyota Rav4 2020. I have attached a review video for you to see how it works.

view full answer...

Answer 3

For your 2019 Toyota RAV4 the best trunk mounted bike rack option we have is the Yakima Fullback part #Y02634 which is a confirmed fit. The reason it's the best is that it has a very wide mounting pad for the weight of the rack and bikes to…

view full answer...

Answer 4

Manufacturers prefer to recommend that you do not use the hooks if possible just because they are what most likely causes damage to the vehicle when using trunk mounted racks like the Yakima Fullback 3 #Y02633. This does not always happen but they…

view full answer...

Answer 5

I checked with Yakima and when installing the Yakima FullBack part #Y02633 on a 2018 Toyota RAV4 you do need to put the lower hooks in anchor mode like you suspected.

view full answer...

Answer 6

I checked with Yakima and the Fullback 2 bike rack part #Y02634 is a confirmed fit for your 2018 Toyota RAV4 Adventure. There are no fit exclusions for the Adventure model. I attached an install video for this rack on a similar Rav4 for you to check…

view full answer...

Answer 7

For your 2020 Toyota RAV4 I highly recommend the Yakima Fullback 2-Bike #Y02634 or the 3-Bike #Y02633, which features an interlocking HUB that lets you adjust the base to fit the shape of your RAV4 and take stress off of the rear spoiler when the…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

2 Bike Rack for a 2019 Toyota RAV4 That Does Not Use a Hitch

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching