Are the Steel Spoke Trailer Wheel - 12" x 4" Rim Hub Centric or Lug Centeric

Question

Question:

Hello, I am wondering if Item # AM20124 is hub centric or lug centric? My original wheels have a 2.65 pilot diameter and I am wondering if these wheels are an appropriate replacement being that they have a larger pilot diameter. Thank you

asked by: Jedchada C

0

Expert Reply:

The Steel Spoke Trailer Wheel - 12" x 4" Rim - 4 on 4 - Galvanized Finish # AM20124 are lug centric. If you have a hub centric setup then you will not be able to use these wheels and need to match your current pilot diameter. If you have a lug centric setup then the larger pilot diameter of 2.84" will work. The pilot diameter only has to match if you need hub centric wheels, otherwise as long as it is the same size or larger it will work.

expert reply by: Robin H

0

Answer 1

I have attached a chart for you to take a look at that includes the lug nut torque specifications. If your wheel uses 1/2 inch lug nuts or wheel bolts like the 12 Inch Steel Spoke Trailer Wheel #AM20124 referenced in your question, you will torque…

view full answer...

Answer 2

I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The torque specifications for the lug nuts while using the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel part #AM35351DX will be between 75-85 ft. lbs. In order to protect from theft I also highly recommend using the Wheel…

view full answer...

Answer 5

When measuring for bolt pattern on an even bolt pattern you would measure from the center of one hole to the center of the hole diagonally across from it. In your picture you started measuring at the 1 inch mark. So if the adjacent measurement is…

view full answer...

Answer 6

For a 4-lug steel wheel with 1/2-inch studs like #AM20124 the correct torque range is 75-85 ft-lbs. For a 15-inch steel wheel like the item #TA37RR that you referenced the torque range is 90-120 ft-lbs. In general the larger a wheel is the more…

view full answer...

Answer 7

Glad to help you with that. The #AM22318HWT wheel has an offset of zero. The wheel's mounting plate is located exactly in the center of the width of the wheel. I've highlighted the other specs in the provided diagram. I've also linked you…

view full answer...

Answer 8

In order to determine what to torque the lug nuts on your 14" trailer wheels, you will need to know what size the lug studs on your hubs are. I've attached a helpful chart that will give you the torque specs for a variety of different wheels…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Are the Steel Spoke Trailer Wheel - 12" x 4" Rim Hub Centric or Lug Centeric

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching