SumoSprings For a 2020 Mercedes Sprinter 3500XD Dually Van

Question

Question:

I have a 2020 Mercedes 3500XD. I know Sumos will fit on a 3500, but will they work on the XD duelly? If so, what is the correct product for the rear? Thank you

asked by: Tim O

1

Helpful Expert Reply:

I reached out to SuperSprings and they confirmed that the SumoSprings Solo Custom Helper Springs # SSR-338-54 are the correct fit for your 2020 Mercedes-Benz Sprinter 3500XD.

expert reply by: Bud M

1

Answer 1

I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-338-54, which will replace your factory bump stops and help support a heavy load to level your ride and minimize sway. These are a no-drill installation, so they're a…

view full answer...

Answer 2

It's a very common misconception that suspension products like the SumoSprings, air bags, or Timbrens #TMBRSP35A will increase the capacity of a vehicle or RV. Nothing will increase the load capacity since there are numerous other factors that…

view full answer...

Answer 3

I recommend using the SuperSprings SumoSprings for your 2019 Mercedes-Benz Sprinter 3500. These are a one-time installation that you never have to worry about checking up on and they provide more support (become more rigid) as you load more things…

view full answer...

Answer 4

For your 2012 Winnebago 24M on Mercedes Benz Sprinter 3500 chassis, I recommend the Timbren system consisting of the Timbren Rear Suspension Enhancement System #TMBRSP35A and #TMBFSP35. Timbren is a stiffer support spring than the SumoSprings, so you…

view full answer...

Answer 5

Since your main focus is sway reduction, I recommend the SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SS62KV for your 2020 Thor Compass. These work like sway bars and will help reduce sway by up to 30 percent. The #SSR-338-54 would…

view full answer...

Answer 6

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 11

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

SumoSprings For a 2020 Mercedes Sprinter 3500XD Dually Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching