Advent Air AC Unit to Replace Dometic on RV

Question

Question:

Gentlemen and Ladies, looking to replace my 13yr old dometic 15k a/c with your ACDOM150... my interior cover panel is faded, do you offer a replacement with the filter that will fit the ACDOM150, could not find on your website. thank you

asked by: Sandy S

0

Expert Reply:

We do have the Advent Air RV AC unit to replace Dometic units like what you have with the part # ACDOM150B. This is the kit you mentioned looking for which would work great as a replacement for the Dometic you have now.

expert reply by: Jameson C

0

Answer 1

There is indeed a good option to replace your current Dometic 59136.621 air conditioner, which is a 15,000 Btu AC. The best option is one from Advent Air: - Advent Air RV Air Conditioner for Dometic Setup w/ Start Capacitor - Black #ACDOM150B or…

view full answer...

Answer 2

Since you have a Dometic setup currently you could easily replace it with the Advent Air Replacement RV Air Conditioner for Dometic Setup w/ Start Capacitor #ACDOM150B that you referenced. This was designed for your exact situation which means it…

view full answer...

Answer 3

The model number of your Dometic AC unit itself isn't actually how to determine compatibility, it will actually be the relay kit with the pin. You will be able to use the Advent Air Replacement RV Air Conditioner for Dometic Setup #ACDOM150B that…

view full answer...

Answer 4

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 5

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 8

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Advent Air AC Unit to Replace Dometic on RV

Product Page this Question was Asked From

Continue Researching