Correct Solera RV Slide-Out Awning for 15'1" Slide-Out

Question

Question:

Im buying a slide-out awning for my RV that measures 15 1 long on the face of the slide and 36 out. Does the awning material measure the15 1? I was looking at item #LCV000251478 Lippert will this fit?

asked by: Gerald W

0

Expert Reply:

Yes, if your slide-out measures across the front, from flange-to-flange, at 181" then the Solera RV Slide-Out Awning, # LCV000251478 is correct part.

expert reply by: Michael R

0

Answer 1

To determine the correct topper like the Solera RV Slide-Out Awning #LCV000168109 you will want to take a measurement. First measure the outside front of box width including the flange. To choose the correct size topper, you will need 2 1/2"…

view full answer...

Answer 2

We do have the correct slide-out awning for you, so long as the 13 foot 11 inch measurement you took was from flange to flange on the outside of the box; you can choose from either White or Black for color: - White: Solera RV Slide-Out Awning -…

view full answer...

Answer 3

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 4

The Solera RV Slide-Out Awning - 12'7" Wide - 48" Projection - Black #LCV000165061 (and the others like it) do come with all of the hardware and brackets needed to install the Slide-Out topper. You won't need to use…

view full answer...

Answer 5

It sounds like you are asking if a Solera Slide-Topper like the 12.5' #LCV000177334 that you were looking at can be installed on your Grand Design trailer that features an electric awning already in place. Just let me know if that is not…

view full answer...

Answer 6

I confirmed with Gen-Y that the measurement from the center of the kingpin to the rear bolt-hole setup is 24 inches on the Gen-Y Shock Absorbing 5th-Wheel Pin Box #GY46FR. I went ahead and attached a diagram that shows this measurement.

view full answer...

Answer 7

Thank you for the information and photo! I was able to determine that you have a 1621 SHD (super heavy duty) pin box rated for 21K. The Gen-Y equivalent is found as part #GY68GR for a 4.5K tongue weight or part #GY46FR for a 5.5K tongue weight.…

view full answer...

Correct Solera RV Slide-Out Awning for 15'1" Slide-Out

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching