Correct Replacement Circuit Board For The MaxxFan Deluxe 7500K

Question

Question:

I need a new circuit board for a MaxxFan Deluxe 7500K Model 00-07500K Serial No. 2104-7500K-4798 Is this the correct one?

asked by: Brian D

0

Expert Reply:

Yes, the correct replacement circuit board for your MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-07500K is the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K.

expert reply by: Bryce D

0

Answer 1

The replacement printed circuit board for your MaxxFan Delux Item #MA00-07500K is Item #MA10A21275K.

view full answer...

Answer 2

The MaxxFan Deluxe Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke #MA00-07500K is not compatible with the old 4 key wall control. It will work with the 2 Key control or the 6 key wall control only as outlined in the…

view full answer...

Answer 3

Yes the replacement circuit board part #MA10A21275K that you referenced is the correct replacement for your MaxxFan 7500K S/N 2018-06-7500K-A00180.

view full answer...

Answer 4

For your MaxxFan part #MA00-07500K that you referenced the correct replacement motor is the part #MA10-20968 that you referenced. The motor comes with connectors that will attach to the circuit board that controls the motor which is part…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Correct Replacement Circuit Board For The MaxxFan Deluxe 7500K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching