Recommended Ladder Rack For A RetraxPRO XR Tonneau Cover On A 2019 Toyota Tundra

Question

Question:

Hi, what are the options available for the racks complete kit or collection of part #s for thule, yakima, or rhino rack that will fit the tracks of the Retrax Pro XR on a 2019 Tundra Crew Max short box? I want to be able to have enough height to put a carrier on top that would extend over the cab. Looking for immediate purchase. Thanks!

asked by: Jim S

0

Expert Reply:

To connect to the RetraxPRO XR tonneau cover T-Slots you'll want the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack # Y01151-58 along with the Tonneau Cover Adapter Kit for Yakima OverHaul HD # Y01155. These adapters will connect to the feet of the ladder rack allowing you to easily slide into the T-Slots of the tonneau cover.

The uprights of the Overhaul HD have a 19" - 30" adjustment to ensure that you'll have plenty of room to have your carrier over the cab of your 2019 Toyota Tundra.

expert reply by: Kevin C

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 3

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 4

The outside diameter of the fitting of the #RE64FR drain tube is 7/8 of an inch. You can see a product description video for the drain tube by clicking the provided link.

view full answer...

Answer 5

You will want to use the K-Source Snap & Zap Custom Towing Mirrors #KS80730 on your 2021 Ram 1500 TRX. These mirror extensions have cutouts for the turn signals, puddle lights and 360 cameras. The CIPA Custom Towing Mirrors #CIP98MR do not have…

view full answer...

Answer 6

The Hullavator Pro #TH898 will work just fine with Yakima round bars and will not require any additional hardware like what you mentioned. The only step that you will skip in the instructions is installing the special angled end cap (page 5) but my…

view full answer...

Answer 7

There are two main components to the Thule Fit Kit for Podium Style Foot Pack part #THKIT3142, a rubber moulding and a metal fit clip. The rubber moulding is contoured to the shape of the side rail but does not hook or clip onto the rail. It will…

view full answer...

Answer 8

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 9

The Thule Fit Kit #THKIT3101 that you referenced is designed for Thule Rapid Podium #TH460R roof-rack legs. I do have a solution for you to add a roof rack or ladder rack to the Retrax XR tonneau cover on your Ford F-150 but unfortunately the Thule…

view full answer...

Answer 10

Generally speaking, soft tonneau covers that mount inside of the bed rails will work with most ladder racks that mount into the truck bed stake pockets. However, although the Tonno Pro Lo-Roll fits this description, I would be concerned with how tall…

view full answer...