Buyers Products Fabricators Hitch Plate Kits For a 2006 GMC Topkick 7500

Question

Question:

I am looking for a hitch plate that will fit a 2006 gmc top kick 7500. Please advise if you have something that will work. Thanks!

asked by: Dane

0

Expert Reply:

I recommend one of the Buyers Products Fabricators Hitch Plate Kits for your 2006 GMC Topkick 7500 as there is not a hitch plate specific to your vehicle. Here are the ones we carry.

Buyers Products Fabricators Hitch Plate - 3/4" x 34-1/2" x 22-1/2" # 3371809027A
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 22-1/2" # 3371809043
Buyers Products Fabricators Hitch Plate - 1/2" x 34-5/8" x 15-5/8" # 3371809040
Buyers Products Fabricators Hitch Plate - 5/8" x 34-1/2" x 15-1/2" # 3371809042

expert reply by: Bud M

0

Answer 1

The Buyers Products #3371809042 measures 9-1/2" on the vertical side with the remaining height being 6" down to the bottom. The #3371809043 measures 14-1/2" on the vertical side with 8" of remaining height down to…

view full answer...

Answer 2

I reached out to the manufacturer, Buyers Products, who told me the Buyers Products Safety Chain Clip - 5/8" Diameter #337SC58B does not have a weight rating because it is a weld-on application, meaning it will only be as strong as the…

view full answer...

Answer 3

For your 2023 Mack MD7 you will need to use one of the Buyers Products Weld-On Pintle Hitch Plates. You will need to select the best plate for your truck based on the dimensions of the plate below. 34-1/2" Wide x 15-1/2" Tall…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only…

view full answer...

Answer 12

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Buyers Products Fabricators Hitch Plate Kits For a 2006 GMC Topkick 7500

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching