What Running Boards Fit My Trim on My 2022 Toyota 4Runner TRD Sport?

Question

Question:

What running board is perfect for this 4runner without removing the rock panel? I included photos.

asked by: Edwin M

0

Expert Reply:

Thanks so much for the photos!

I confirmed with Westin that a great set of running boards that fit with your molding on your 2022 Toyota 4Runner TRD Sport is the Westin Molded Running Boards w/ Custom Installation Kit - 6" Wide - Black # 27-0000-1945 or the LED lighted version # 27-0005-1945. These boards will install to your frame underneath your panels. They also come with a 5 year warranty.

I went ahead and attached a video that shows these running boards installed on a vehicle with very similar panels as your vehicle for perspective.

expert reply by: Bob C

0

Nieghbor's Trim on His 2022 Toyota 4Runner TRD Sport
(click to enlarge)

Answer 1

Hey Donald, the best Blue Ox weight distribution would be the pat #BXW0550 as it has a perfect tongue weight range for your 450 lb tongue weight trailer.

view full answer...

Answer 2

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric Trailer…

view full answer...

Answer 3

To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part #T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements. Part #T1242600 will work as a replacement…

view full answer...

Answer 4

The grease cap part number that you referenced cross references to a drive in cap with a 2.44 inch outside diameter. If you have a standard cap then the Grease Cap, 2.44 inch OD Drive In, item #RG04-060, is the correct part. If you have a grease…

view full answer...

Answer 5

The mounting holes on the Curt 5-Position Adjustable Channel Bracket #C48650 measure 10" center of hole to center of hole.

view full answer...

Answer 6

The weight capacity of the Yakima CoreBar Crossbars like part #Y00421 is 220 lbs which is for loads evenly distributed across both bars. If you need a higher weight capacity, Yakima does off the HD Crossbars like part #Y01157 which have a 500 lb…

view full answer...

Answer 7

Dexter part 10-41 is a grease seal for a mobile home utility hub. It has a specified inside diameter of 1.938-inches and an outside diameter of 2.523-inches. The nearest match we offer is the Redline part #10-40 which is a single-lip seal that has…

view full answer...

Answer 8

Ideally you want your loaded tongue weight to fall right in the middle of the tongue weight range of a weight distribution system. Since trailer tongue weight is typically 10-15 percent of the total trailer weight the Blue Ox Sway Pro part #BXW0550…

view full answer...

Answer 9

The Blue Ox SwayPro Weight Distribution System part #BXW0750 which is rated for 550 lbs - 750 lbs is what I recommend for a trailer with 550 lb tongue weight and around 100 lbs in the truck bed. In regards to choosing the best weight distribution…

view full answer...

Answer 10

The Curt #C56196 2 to 3 wire taillight converter is exactly what you'll need to split out the turn signal function from the brake lamp circuit. However, keep in mind that the #C56196 is NOT compatible with LED lamps, unfortunately we don't…

view full answer...

What Running Boards Fit My Trim on My 2022 Toyota 4Runner TRD Sport?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching