Anti-Rattle Device For 1-1/4 to 2 Hitch Adapter With Solid Hitch Shank

Question

Question:

Is this hitch adapter hollow throughout? Can I equip it with an anti-rattle pin/ tensionere

asked by: Adam

0

Expert Reply:

The Hitch Adapter # 80303 has a solid 1-1/4" hitch tube. You will need the Roadmaster Quiet Hitch # RM-061-125 to eliminate the hitch rattle.

The etrailer Hitch Receiver Lock # e98879 will ensure the adapter is secured on your vehicle.

expert reply by: Bud M

0

Answer 1

We do have a few options for your 2022 Acura MDX A-Spec, like the Draw-Tite Max-Frame Trailer Hitch Receiver #DT42MR and the Curt Trailer Hitch Receiver #C22HR. Both trailer hitches are rated at the same capacities of 6,000lbs GTW, and 900lbs tongue…

view full answer...

Answer 2

So the 18 inches that is being referred to here is actually the diameter of the wheel/rim, as opposed to the diameter of the actual tire itself. I know that can be confusing but for whatever reason that's how manufacturers define it, so what…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

The Draw-Tite Max-Frame Trailer Hitch Receiver #DT42MR does require cutting a 4" x 3-1/2" portion of the fascia on your 2023 Acura MDX. For a hitch that does not require any fascia cutting use the etrailer Trailer Hitch Receiver #e27KR.

view full answer...

Answer 5

I would be happy to help you. The difference in the installation time between the two hitch receiver's on your 2022 Acura MDX is that the Curt item #C22HR sits lower when mounted so it does not requiring trimming of the rear bumper cover. The…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

Hey Les, the Draw Tite hitch part #DT55MR would be a solid 2 inch hitch option for your 2024 Toyota Sienna that would have plenty of towing capacity. I looked up your towing capacity and it can tow up to 3,500 lbs. To install a brake controller like…

view full answer...

Answer 8

We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…

view full answer...

Answer 9

I'm happy to say that there is indeed both a trailer hitch and trailer wiring for your 2024 Chevy Trax. The fits for both parts on your '24 Trax are the following: - Curt Trailer Hitch Receiver #C75VV - Tail Light Converter with 4-Pole Flat…

view full answer...

Answer 10

I have a solution for you, but the distance from the hitch pin hole of the Curt adapter part #C45785 to the back of the hitch opening is 2.55 inches so it would not be deep enough for your bike rack. Instead we have the Brophy hitch adapter part…

view full answer...

Answer 11

They sure do! I'd recommend the Curt Class I hitch, part #C11576. Curt confirms that the hitch fits all models of the 2021 Camry, including the Hybrid model. If you'll be doing some light duty towing with the hitch, you'll need a few…

view full answer...

Answer 12

The lock plug for the Rapid Podium Feet for Thule Crossbars #TH460R has been discontinued, unfortunately. So, your only option is to use their lock cores #TH450400 to secure your feet.

view full answer...

Anti-Rattle Device For 1-1/4 to 2 Hitch Adapter With Solid Hitch Shank

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching