Troubleshooting Installation of Electric Brakes With 4 Bolt Brake Flange
Question:
I have an old car hauling trailer. It has a 2 3/4inch bolt pattern for mounting the brakes to the frame. The electric brake kit I bought has a 3inch bolt pattern. Is there an electric brake kit with two and three quarter inch bolt pattern? Or any other advice on how to get these electric brakes installed? Thank you!
asked by: Charlie F
Expert Reply:
The measurements for the brake flange and the bolt pattern on trailer brakes is a center to center measurement, not outside to outside. The electric brakes you have appear to be using the industry standard which is typically listed as 2-3/4" or 2-7/8" with the actual dimension being more like 2-13/16".
I can't exactly tell by the pictures but it looks like the two measurements you have there are incredibly close so if you have not tried to install these I recommend double checking to make sure they don't fit. If these do not fit the brake flange on your axle, you will need to replace the brake flange with # 4-34 for 1-3/4"axles, # 4-35 for 2-3/8" axles, or # DM52415 for 3" axles.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 3" Pilot Hole
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 3 Inch Diameter Axle
- Demco
more information >
Product Page this Question was Asked From
Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- Dexter
more information >
Continue Researching
- Video: Redline Trailer Brakes 4-35 Review
- Shop: Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Video: Demco Trailer Brakes DM60124 Review
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 2-3/4" Pilot Hole
- Shop: Demco Trailer Brake Mounting Flange - 4 on 4-13/16" Bolt Pattern - 3" Pilot Hole
- Shop: Brake Mounting Flange for 2-3/8" Round Axle
- Search Results: brake backing plate
- Shop: Trailer Brake Mounting Flange for 3-1/2" Axles, 12-1/4" Brake Assemblies
- Q&A: How To Determine Parts Needed To Add Electric Brakes To Stehl ST80TD Tow Dolly
- Shop: Brake Flange Stud - 7/8" Long - 3/8"-24
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Video: Redline Trailer Brakes 4-34 Review
- Article: How to Raise Your Travel Trailer Height
- Q&A: Correct Replacement for GS1719 Grease Seal
- Search Results: lm48548
- Search Results: m12649
- Search Results: gs 1719dl
- Search Results: gs 1719
- Q&A: Recommended Tire Size for Trailer Tire that is 15 inch by 7 inch
- Q&A: Parts Needed to Convert From Surge to Electric Brakes
- Q&A: Which End of Kodiak Hydraulic Brake Hose # BH-3MFS90-1-5 Should Be Connected to the Hub
- Q&A: Can Taller Trailer Suspension Equalizer Increase Trailer's Ride Height
- Q&A: Does Direction Matter When Installing Double Eye Leaf Springs?
- Video: etrailer Trailer Brakes - Electric Drum Brakes - AKEBRK-2 Review
- Video: Best Brake Actuator Options
- Video: CE Smith Trailer Hubs and Drums - Hub - CE13100 Review
- Video: Review of Dexter Axle Trailer Brakes - RH and LH 7 Inch Electric Drum Brakes - 23-47-48
- Search Results: are parts
- Search Results: l44643
- Shop: Brake Controller