Replacement Bearings And Seals For Al-KO Axle # H523 653644 5K Axle

Question

Question:

Al-KO Kober Corp Type- H523 653644 5000# Axle need bearings and seals for 2 axles

asked by: Jesse J

0

Expert Reply:

We have a bearing kit for this axle, part # BK3-110. It comes with the inner and outer bearings and a double lipped grease seal. I have included a product description link and a video demo link below.

expert reply by: Mark Smith

0

Answer 1

We have a few different kits for you to check out depending on the weight capacity of your axles and the inner diameter of your grease seal. If you can confirm the weight rating of your axles and the inner diameter of your grease seals then you just…

view full answer...

Answer 2

For a Dexter 6,000 lb axle the correct bearing kit with grease seal would be the #BK3-110.

view full answer...

Answer 3

Given the inner and outer bearing numbers you kindly provided (thanks for that!), you have a 5200 lb axle. We offer two different bearing kits that could work for you. Both include the replacement inner and outer bearings, the compatible races and…

view full answer...

Answer 4

It sounds like you have selected the correct grease seal, #GS-2250DL, for your spindle and Dexter hub. The 3.376 outer diameter matches your hub and because the rubber inner part of the seal has to create a tight seal, to keep grease in and road…

view full answer...

Answer 5

We have two bearing kits that would possible work for a Lippert 6k axle. The part #BK3-100 has bearings 15123 and 25580 plus seal 10-36. This would be the kit for if your spindle has a bearing surface that is 2.250 inches. If instead your seal…

view full answer...

Answer 6

There's crossover; the 15123 and LM67048 have the same inner diameter, so they fit the same spindle, and often hubs fit both 5,200 lb and 6,000 lb axles. So you are perfectly okay with what you have and the correct replacement bearing kit for…

view full answer...

Answer 7

The standard 5,200 lb axle will use either the Bearing Kit #BK3-310 which has a grease seal ID of 2.125" or the Bearing Kit #BK3-300 which has a grease seal ID of 2.25". The bearing numbers are the same for each kit (25580 inner and LM67048…

view full answer...

Answer 8

We have the bearing kit part #BK3-100 that is designed for Dexter 6k trailer axles like yours. This comes with new bearings and a seal. I attached an install video that shows a trailer hub getting rebuilt for you to check out as well.

view full answer...

Answer 9

The correct bearing kit for a Dexter 6k trailer axle would be the part #BK3-100 which comes with the correct bearings and seal you are needing. Most of the numbers you mentioned are just serial numbers and capacities but the HF=87 inch is the…

view full answer...

Answer 10

The short answer is Yes, bearing #15123 is slightly larger and stronger than #LM67048 and they use different races which means they are not interchangeable. Bearing 15123 uses race #15245 which has an outer diameter of 2.441 inches and bearing…

view full answer...

Answer 11

The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can…

view full answer...

Answer 12

The inner diameters of the LM67048 and 15123 both are the same (1.250 inches). That means that a hub with either bearing in the outer bearing would fit your spindle. The part #AKHD-655-6-EZ-K would fit your axle.

view full answer...

Replacement Bearings And Seals For Al-KO Axle # H523 653644 5K Axle

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching