Is The Shackle For The Roadmaster Rear Anti-Sway Bar Available For A 2005 Freightliner M2?

Question

Question:

Looking for the rear swaybar shackles for 2005 freightliner m2

asked by: Joe R

0

Expert Reply:

The Replacement 12-5/8' Shackle for Roadmaster Anti-Sway Bar Kits # RM-B404 that you mention is the correct replacement for the Roadmaster Front Anti-Sway Bar Kits 1169-110, 1169-208, and 1169-212, as well as the rear anti-sway bar kit RM-1139-149.

These kits are not the correct kits for your 2005 Freightliner M2, and in turn, the shackle mentioned won't be compatible with your vehicle.

Unfortunately, the shackle in the rear anti-sway bar kit like the Roadmaster Rear Anti-Sway Bar # RM-1209-113, which is a confirmed fit for your vehicle, is not offered as a replacement.

expert reply by: Bryce D

0

Answer 1

The Timbren kit part #TFFM2A is confirmed to fit your 2007 Freightliner M2 112 chassis with air suspension so it would work well for you. For rear suspension you then would want the part #TFRM2A. For a rear sway bar though you would need to follow…

view full answer...

Answer 2

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 3

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 4

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 5

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 6

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Is The Shackle For The Roadmaster Rear Anti-Sway Bar Available For A 2005 Freightliner M2?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching