Trailer Hitch Recommendation For A 2022 Kia Niro
Question:
I need pre purchase information about trailer hitch that cant be found on the website. Thanks
asked by: Dan O
Expert Reply:
When it comes to installing a trailer hitch on your 2022 Kia Niro The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4 inch # 36600 will work. The hitch has a gross towing weight up to 3,500 pounds and has a tongue weight up to 350 pounds. Your Kia Niro has a towing capacity of 2,866 pounds, so do not go over the vehicle's towing capacity. It has a bolt-on installation with no welding required. The hitch has a concealed cross tube which will have a sleeker look under your vehicle. The Draw-Tite hitch it more concealed when it comes to the other hitches and gives it a sleeker look because the frame of the hitch is more hidden underneath your vehicle.
I also recommend The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118749. This wiring harness has a simple plug and play installation that plugs in behind the driver and passenger side tail lights, inside the trunk, and then run the hot lead to the battery. The wiring will make your vehicle's brake lights and turn signals in unison with your trailer's brake lights and turn signals.
The Curt Towing Starter Kit for 1-1/4 inch Hitches - 2 inch Ball - 3/4 inch Rise - 3,500 lbs # C45147 will slide into your receiver hitch so you can tow your trailer.
I have attached installation video links below.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Curt Towing Starter Kit for 1-1/4" Hitches - 2" Ball - 3/4" Rise - 3,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 1 Inch
- Rise - 0 Inch
- Fits 1-1/4 Inch Hitch
- 3500 lbs GTW
- Class II
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Does Draw Tite Hitch # 36600 Fit Electric 2022 Kia Niro
- Q&A: Recommended Wiring Harness for a 2023 Hyundai Palisade
- Q&A: Parts Needed For Carrying Bikes Behind a 2019 Kia Niro Plug In Hybrid
- Q&A: Trailer Hitch Receiver For a 2023 Kia Niro EX Limited Hybrid
- Q&A: Installation Instructions for Curt Trailer Hitch Receiver # C13329
- Q&A: Estimated Installation Time for Curt Trailer Hitch Receiver on 2023 Kia Niro
- Article: Rust Prevention
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Determining Trailer Tongue Weight
- Article: Trailer Hitch Receiver Sizes
- Article: My Trailer Hitch Doesn't Fit
- Article: Best Bike Racks for Electric Bikes