DeeZee Invis-A-Rack Ladder Rack Compatibility With A 2022 Ford F-150 5-1/2' Bed

Question

Question:

Im looking for a ladder rack for a 2022 Ford F-150 5-1/5 foot bed. You sell the Invis-A-Rack and show that it is suitable for my truck The manufacturers website says that the 2022 F-150 5-1/2 ft truck does not fit this rack. Can you comment on this disrepancy?

asked by: Edward G

0

Expert Reply:

The Invis-A-Rack Folding Ladder Rack # DZ951550 is a confirmed fit for your 2022 Ford F-150 5-1/2' bed. I called the manufacturer, DeeZee, to confirm and they stated it was a fit but hadn't been updated on their site yet.

expert reply by: Kevin C

0

Answer 1

Yes, there are DeeZee Invis-A-Rack ladder racks that will fit your 2017 Chevy Silverado 1500 short bed. If you have the really short 5-1/2 foot bed you can use #DZ951550. And if you have the 6-1/2 foot bed you can use #DZ951600.

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 4

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…

view full answer...

Answer 5

I have a solution for you Travis as Pace Edwards does not offer a contractor rack for your 2023 GMC Sierra 1500. Instead you can use the Pace Edwards Full-Metal JackRabbit Retractable Hard Tonneau Cover #311-M-FMCA28A59 with the Thule TracRac SR…

view full answer...

Answer 6

Hi Ruben; thanks for the question, and while there is one rack for your 2023 Ford F-150 with a 6-1/2' bed compatible with the Pace Edwards UltraGroove Metal Retractable Hard Tonneau Cover #PE66UV, it does not have sides, and is part #TX84NV.…

view full answer...

Answer 7

Yes. The Adarac #A66RR is compatible with the Pace Edwards Switchblade #PE29UV since the Adarac sits on top of the bed rails and the Switchblade mounts inside the rails. Because this is a fully retractable cover it's not going to be obstructed by…

view full answer...

Answer 8

Trailer suspension equalizers like #TREQ104 do not carry weight ratings but they are available in many different sizes. They will handle as much weight as any springs you'll be using with them. Part #TREQ104 measures 5-3/4-inches between its…

view full answer...

Answer 9

The grease seal we offer with the same dimensions as the Napa 16667 seal you mentioned is part #168233. This seal has an I.D of 1.688 inches and an O.D of 2.332 inches

view full answer...

Answer 10

With this type of problem it's almost always related to an insufficient ground situation. When a trailer's wiring doesn't have enough of a ground you'll start seeing other circuits behaving weird as the lights are trying to ground…

view full answer...

Answer 11

What you are experiencing is due to the fact that LED taillights only require a very small amount of amperage to illuminate. A tiny amount can cause them to illuminate. Trailer wring for the most part goes totally dead when the vehicle is off. But…

view full answer...

Answer 12

I have a solution for you, but there are not any ladder or overland racks that are going to allow the full functioning of your BAKFlip MX4 folding tonneau cover; because most ladder/overland racks have an inward tilt, it's normally recommended…

view full answer...

DeeZee Invis-A-Rack Ladder Rack Compatibility With A 2022 Ford F-150 5-1/2' Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching