Swagman Bike Cover Compatibility With Two RadRover Plus E-Bikes

Question

Question:

I have a Hollywood e-bike rack for 2 ebikes. So you carry a cover that would cover my 2 Radrover plus bikes?

asked by: Laura C

0

Expert Reply:

I've attached a diagram of the dimensions we have for the Swagman Bike Cover for RVs # S24FR below. The width/depth of this cover is roughly 24" but it is a bag with a lot of extra material so there is some play in it to accommodate handlebars. I recommend loading up your bikes on the rack and measuring the width/depth of the bikes/rack to get a better idea of the compatibility of this cover. If you're within a few inches of 24" then you will be fine.

expert reply by: Kevin C

0

Swagman Bike Cover Dimensions
(click to enlarge)

Answer 1

The Self-Locking, Adjustable, Aluminum Ball Mount #DTALBM6425 that you referenced is designed for 2-1/2 inch hitch openings, and while it does appear to be a 2 inch ball mount with a sleeve on it, it will work just fine on a 2-1/2 inch hitch. The…

view full answer...

Answer 2

Yes, if you are not able to install the Roadmaster Quiet Hitch part #RM-062 and part #RM-061 with the lock bar facing up, you may flip it over and install it so the lock bar is on the bottom of the receiver. I have attached a photo of the U-bolt…

view full answer...

Answer 3

The Swagman Bike Cover for RVs - Large - 2 Bikes #S24FR is a great option for you. It is made of a water-resistant, 420-denier nylon, has a zipper for easy installation, and has 5 cinching straps to make sure you are able to secure the back so it…

view full answer...

Answer 4

The Swagman 2 Bike Bag #S24FR measures 29" at the top, 70" at its widest sections, and is 52" tall. You should not have any issues using this bag with your 1UP Bike Carrier, as this bag can be used on any hitch mounted bike rack on a…

view full answer...

Answer 5

Due to the limits of trailer taillight wiring circuits your Hollywod Racks Safety LED light bar part #HLY54RR is functioning properly. The turn signals and the stoplights are all on the same circuit so the lights are going to all light up when you…

view full answer...

Answer 6

I recommend the Roadmaster Dual Hitch Receiver Adapter, 10" Drop/Rise item #RM-077-10. This adapter was designed for this type of set up. Your Jeep Rubicon and Swagman E bike rack weigh well below the 10,000 lbs maximum capacity of this hitch. I…

view full answer...

Answer 7

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 8

Your best platform bike rack for spare clearance is the RV Rider part #HLY64FR as it has the most clearance between the hitch pin hole and the wheel trays. This has 12 inches from the pin hole to the pivoting portion of the rack but then has even…

view full answer...

Answer 9

Depending on the hitch your 2017 Jeep Wrangler has, there may be enough clearance from the spare for you to use the Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes #HLY84FR. In order to determine this, you'll need to take a quick…

view full answer...

Answer 10

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 11

I checked out pictures of the rear of your Reflection 337RLS and I don't see why you would need an extension to use the Hollywood Racks RV Rider Bike Rack part #HLY64FR. This rack has quite a bit of extension between the hitch pin and the nearest…

view full answer...

Swagman Bike Cover Compatibility With Two RadRover Plus E-Bikes

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching