Replacement Toilet Seat For A Dometic 310 Series Toilet

Question

Question:

Will this toilet seat fit my Dometic 310 toilet in my 2019 Leisure Travel Van Unity FX Class C motorhome? Thank you.

asked by: Kay W

1

Helpful Expert Reply:

Yes, the Replacement Wooden Toilet Seat with Slow Close Lid for Dometic Part-Timer RV Toilets # DOM83FR will fit your Dometic 310 Series Toilet, on your 2019 Leisure Travel Van Unity FX Class C Motorhome.

expert reply by: Bryce D

1

Answer 1

As the Dometic 310 Series toilet 9108552772 (302310041) that you have was discontinued, I cannot 100% confirm the fit Replacement Wooden Toilet Seat #DOM83FR. However, I did include a diagram showing a bunch of measurements that will help. This does…

view full answer...

Answer 2

It sure is! For your Dometic Part-Timer 310 Series RV Toilet you will need the Replacement Wooden Toilet Seat with Slow Close Lid for Dometic Part-Timer RV Toilets - White #DOM83FR. I included a video of the #DOM83FR for you to take a look at.

view full answer...

Answer 3

The Replacement Toilet Seat and Lid for Dometic 300 Weekender RV Toilets #DMC99FR is made of polypropylene. This is the only replacement lid we have for the Dometic 300 Weekender RV Toilets, there is not a wood option. The only wood toilet seats we…

view full answer...

Answer 4

We put small etrailer stickers on the products we take pictures of to help prevent other retailers from using our pictures. If you ordered the #DOM83FR the likelihood that you'd get the one with the sticker is very low but even if you did it…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...