Moving Propane Tank Bracket On a Travel Trailer For Fastway e2 Weight Distribution to Fit Properly
Question:
I have the E2 800lb system. It is mounted on a grand design imagine 2910 trailer. The L brackets are as far forward as they can be due to the propane tank bracket. At 90 turning, the spring bar end is halfway through the L bracket, if I turn as sharp as I can, I’m afraid the spring bar will pull out of the L bracket. Can I buy longer bars? I should buy the 1000lb bars anyways due to a little higher hitch weight anyways. Please help….
asked by: Dean L
Expert Reply:
You will not need to change the bars on your Fastway e2 weight distribution hitch unless you decide to move up to the 1,000lb bars. The propane tank bracket on your Grand Design Imagine 2910 travel trailer is mounted to the top of you frame with screws. You simply need to remove the tanks to access the screws and move the propane tank Pan # 37207-30485 into a position that will allow for your frame brackets to fit in the correct location(See image of slots for propane tank pan below). Fastway does not make longer bars for their weight distribution hitches.
Since you did not specify if you had a Fastway e2 Trunnion # FA92-00-0800 or Round Bar # FA94-00-0800 you will need to select the correct 1,000lb bars.
Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems # FA92-01-1099
Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW # FA94-02-1099
(click to enlarge)
Products Referenced in This Question
Standard RV LP Gas Tank Pan - Polar White
- Accessories and Parts
- Propane Accessories
- Mounting Hardware
- Tank Pans
- JR Products
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- Fastway
more information >
Replacement Trunnion Spring Bars for Fastway e2 Weight Distribution Systems -Qty 2 - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Trunnion Bar
- e2
- Fastway
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Fastway
more information >
Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 1,000 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 1000 lbs TW
- Round Bar
- e2
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 700 lbs
- 800 lbs
- 900 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: 10~51
- Shop: Replacement Magnet for Dexter 12-1/4" x 5" Electric Brake Assemblies
- Shop: Trailer Wiring
- Shop: Trimax Dual Purpose Coupler Lock and U-Lock for 1-7/8", 2", and 2-5/16" Couplers
- Search Results: 070~006~01
- Search Results: bearings
- Search Results: brake shoes
- Search Results: 23~105
- Search Results: una~232
- Search Results: 23~181
- Shop: Replacement 10" x 2-1/4" Electric Brake Shoes - 1 Brake Assembly
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Trimax Puck Locks for Trailer Door Hasps - 3/8" Shackle - Steel - Chrome - Qty 3
- Shop: Unitized Oil Seal
- Shop: Replacement Anchor Yoke Assembly for Dexter Disc Brake - 12,000 lbs
- Shop: Brake Controller
- Article: Big Truck Big RV
- Video: Reese Weight Distribution System Chain Hangers Installation
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Propane Tanks Interfering with Weight Distribution System Take Up Brackets
- Q&A: Chains for Weight Distribution System are Too Short for Tall Trailer Frame
- Q&A: Can Weight Distribution Chains Hang at an Angle or Do They Have to be Straight Up and Down
- Video: Review of Ultra-Fab Products Trailer Jack - A-Frame Jack - UF38-944040
- Video: Phoenix Electric A-Frame Trailer Jack Review
- Video: Review of Diamond LED Strip Lights - Smart LED 16 Foot Color Light Strip Wireless Remote - DIA66QR
- Video: Optronics LED Clearance or Side Marker Trailer Light with Reflector Review
- Video: Optronics RV Lighting - Utility Light - ILL71CBAWN Review
- Q&A: Brake Controller Installation on 2002 Mitsubishi Montero with 4-pole Trailer Connector
- Video: Valterra Heating and A/C Vent Register Review and Installation