Recommended Trailer Hitch Receiver For 2020 Chevy Bolt EV

Question

Question:

Hello I would like to install a hitch on my 2020 Chevy Bolt. What do you recommend for a trailer light wiring harness / connector.

asked by: Bob D

0

Expert Reply:

We can definitely get your 2020 Chevy Bolt EV set up with a trailer hitch, although there isn't any trailer hitch wiring that is a fit for this vehicle, which I verified with the manufacturers. But you can add a hitch for an accessory such as a bike rack, and by far the best option is from EcoHitch:

- EcoHitch Hidden Trailer Hitch Receiver # 306-X7359

The reason the EcoHitch # 306-X7359 is the top option is because this is the only hitch for this vehicle which has a 2 inch receiver. This is really important because when using it for accessories such as bike racks and cargo carriers, a 2 inch receiver is going to have a much wider range of higher-quality options to choose from.

It also has a 300 lb tongue weight capacity, which is three times more than any other hitch, so even if you have heavier bikes cargo you'll be able to use this hitch.

expert reply by: Kyle S

0

Answer 1

There is one trailer hitch receiver that stands above the rest for your 2023 Chevy Bolt EV, which is the hitch from EcoHitch; I verified with them the correct part number for your '23 Bolt EV is the following: - EcoHitch Hidden Trailer…

view full answer...

Answer 2

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7359 is a great option for a 2017 Chevrolet Bolt EV as it has the larger receiver tube size which allows for more accessories to be used. If you wish to tow a trailer then you will need to…

view full answer...

Answer 3

I highly recommend going with the EcoHitch #306-X7359 for bike rack and cargo carrier usage on your 2019 Chevy Bolt EV because it is the only trailer hitch option that has a 2" receiver. The larger receiver means that you have access to a wider…

view full answer...

Answer 4

I took a look at the instructions for the Curt Trailer Hitch Receiver item #C38DR. The piece of the fascia you are cutting into is behind the panel the third brake light is attached to. There is a gap behind it where the hitch will protrude from but…

view full answer...

Answer 5

We have exactly what you are looking for. You will need to go with the EcoHitch Hidden Trailer Hitch Receiver #306-X7359 which is a confirmed fit for your 2022 Chevy Bolt EV and gives you the 2" receiver you were wanting. This hitch has a 300lb…

view full answer...

Answer 6

The Thule EasyFold XT bike rack part #TH903202 that you referenced would easily fit in the EcoHitch 2 inch hitch part #306-X7359 that fits your 2017 Chevy Bolt EV as the pin distance is right at 2-1/2 inches from face of hitch opening.

view full answer...

Answer 7

The overall weight of the EcoHitch part #306-X7359 that you referenced is 43 lbs. Since the hitch fits right up to the bottom of the bumper of the vehicle it's installed on the vehicle will basically lose 2 inches of ground clearance with the…

view full answer...

Answer 8

Between the Curt Trailer Hitch, #C11457, and the Draw-Tite Trailer Hitch , #24956, I recommend the Draw-Tite Hitch for its better ground clearance. The Draw-Tite hitch's receiver opening sits closer to the hitch cross tube. The location of the…

view full answer...

Answer 9

There is a pretty significant difference when it comes to the hitches you mentioned that fit your 2018 Chevy Bolt EV, the Draw-Tite Trailer Hitch Receiver #24956 and EcoHitch Hidden Trailer Hitch Receiver #306-X7359. As you mentioned, the Draw-Tite…

view full answer...

Answer 10

The correct Draw-Tite Trailer Hitch Receiver for a 2022 Chevrolet Bolt EUV is part #DT64GR. This is a bolt-on hitch with a 2" receiver which can be used for towing or hauling bike racks/cargo carriers. The Draw-Tite Trailer Hitch Receiver part…

view full answer...

Answer 11

I spoke with my contact at Draw-Tite and he stated that the Draw-Tite Sportframe Trailer Hitch #24956, which is confirmed to fit your 2017 Chevrolet Bolt EV, has a measurement from the ground to the top of the receiver when installed on your vehicle…

view full answer...

Answer 12

We do sell replacement install hardware for all of the trailer hitches we offer including your Draw Tite part #24956 that fits your 2021 Chevy Bolt EV with the part number #RHK. You'd need to enter your hitch part number and select the…

view full answer...

Recommended Trailer Hitch Receiver For 2020 Chevy Bolt EV

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching