HappiJac Manual To Electric Conversion Kit

Question

Question:

Do you offer a kit with two angled heads and two straight heads? I see you have the conversion kit with straight heads, control board, and controller but I need two of each head.

asked by: Bryan K

0

Expert Reply:

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is only available in the straight head version.

expert reply by: Bryce D

0

Answer 1

The heads that come with the Replacement Motor Heads w Circuit Board and Remote #LC733960 measure 9-1/8" from the bolt hole that connects them to the legs up to the topmost part of the motor (see attached). Hopefully this will be enough…

view full answer...

Answer 2

In order to replace the motors on the HappiJack Truck Bed Camper Jacks 4150 and 4500 you'll need an update kit, the Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems part #LC733960-182524 which comes with new motors and…

view full answer...

Answer 3

The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems #LC733960-182524 is compatible with with your 4150 model but not the 4500 so you would need to replace them system. The HappiJac Manual Truck Camper Jack System #LC736514-4…

view full answer...

Answer 4

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 5

It sounds like you are wanting to know if your current 4150 motor will work with the Replacement Jack for HappiJac Truck Camper Jack Systems #LC736514 (4220). Yes, the 4150 drive motor that you have will work with the #LC736514.

view full answer...

Answer 6

The dimensions I can find online for a GC6AA-10E show it needing a 16" x 16" door, but there are plenty of outliers out there that can require different sized doors so it's best to measure what you current have and then find the…

view full answer...

Answer 7

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

I recommend installing the Firestone Ride-Rite Air Helper Springs #F2597 on your 2015 Ford F-250 Super Duty. This has a 5,000 lb weight capacity (although it only helps handle the load and won't increase the truck's weight capacity) and is…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

HappiJac Manual To Electric Conversion Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching