Replacement Antenna for Furrion FOD43TA-BL Monitor

Question

Question:

Have a Furrion FOD43TA-BL. I need a replacement antenna

asked by: ROGER O

0

Expert Reply:

The # 772577 antenna that you referenced is the correct replacement antenna for the monitor used by the Furrion FOD43TA-BL back up camera system.

expert reply by: Jameson C

0

Answer 1

I spoke to Furrion and the Replacement Antenna #772577 can indeed work as a replacement for the monitor of your Furrion FOD43TA-BL camera set up. However, they did mention that if the piece that this will thread onto broke off the actual monitor,…

view full answer...

Answer 2

Try holding the button on the bottom of the camera for 2 seconds and the camera should then pair to the monitor as long as everything has power. I attached a picture that shows the button.

view full answer...

Answer 3

The Furrion FOD43TA-BL you have now is an older model of Furrion's current line of camera systems. Unfortunately there is no longer a replacement monitor available that is compatible with this system. We've actually contacted Furrion more…

view full answer...

Answer 4

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and…

view full answer...

Answer 5

The antenna should just twist on and off so if the broken one on your current system is stuck you can use pliers to get a bit of a better grip to assist in unscrewing it, which will allow you to install the Replacement Antenna for Furrion Vision S…

view full answer...

Answer 6

The Replacement Antenna for Furrion Vision 1, 2, and S Wireless RV Camera Systems #772577 is only a replacement for the camera. I reached out to my contact at Furrion and there is not a replacement antenna option for the monitor. It is integrated and…

view full answer...

Answer 7

Hey Richard, thanks for reaching out! The Air Lift LoadLifter 7500 XL Air Helper Springs #AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500. The only way to remedy this is to use the…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

view full answer...

Answer 11

The Furrion camera system we have is a closed system and would not be compatible with the in-dash display so you would need to purchase GM's camera system to be able to connect to your display instead of having another monitor. If you do end up…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Antenna for Furrion FOD43TA-BL Monitor

Product Page this Question was Asked From

Continue Researching