Replacement Grease Seal for Shorlandr with Manual that Calls for TCM127194TB

Question

Question:

My Shorlander trailer manual lists seals TCM12192TB and TCM127194TB, do you know the difference between these parts or are they equivalent

asked by: David K

0

Expert Reply:

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part # RG06-010, which is a double-lip seal sold as a pair and will work for you. Its outer diameter is 1.983-inches and its inner diameter is 1.249-inches. This is the same as the other number you mentioned.

expert reply by: Jameson C

0

Answer 1

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 2

We have the grease seal part #RG06-010 which is a pair of seals that match the dimensions you listed. This has an inner diameter of 1.249 and an outer diameter of 1.983 and will work great for you regardless of the thickness difference. The thickness…

view full answer...

Answer 3

If you have the bearing numbers and the axle capacity, we may be able to find the right seal for your trailer. If not, you will need to take an accurate measurement of the outside diameter of your existing seal, or the inside diameter of the mounting…

view full answer...

Answer 4

The clips on the #e77SR leaf springs are designed to be forward of the axle due to braking axle wrap (twisting). The straps/clips aren't super strong to prevent this but they're still there. If the strap comes off or the leaves come apart it…

view full answer...

Answer 5

The closest match to the measurements you have provided is #RG06-010. It has an outer diameter of 1.983 inches and an inner diameter of 1.249 inches. To determine if this is correct I would need to know the inner and outer bearing numbers stamped…

view full answer...

Answer 6

We have a 2,000 lb axle leaf spring that is 26 inches long that has 4 leafs. For that you'd want the part #e77SR which would work well as long as you don't need the additional 200 lbs of capacity that your 2,200 lb axles have.

view full answer...

Answer 7

Based on the dimensions you gave the correct seal is the part #RG06-010. This seal has an inner diameter of 1.249 inch and an outer diameter of 1.983 inch.

view full answer...

Answer 8

I have a solution for you, but we do not have a double lip grease seal with the exact measurements you specified. However I was able to find out that the GS-1250 DL that you mentioned has the following measurements: Inside Diameter: 1.249"…

view full answer...

Answer 9

To determine which double lip grease seal that you will need, I'll would just need the reference number from the inner wheel bearing and the diameter of the spindle surface where the grease seal rides. To get the spindle diameter, you'll need…

view full answer...

Answer 10

Thanks for the dimensions of your seals. Based on that the correct replacement would be the part #RG06-010 for a pair or part #34823 for a single seal. We have replacement cotter pins like the part #165649 which is steel but we do not have any…

view full answer...

Answer 11

You will definitely want to go with a double lip seal if you are using Bearing Buddies because they will prevent blowing out grease from the other side and hold pressure better. Go with seal pair #RG06-010 that you have referenced to get a pair of…

view full answer...

Answer 12

I think that the 1-1/2" measurement that you pulled from your spindle is the landing for the grease seal. Your Inner Bearing #LM67048 (1.250 inner diameter) and Outer Bearing #LM11949 (0.750" inner diameter) do match what the SS733 hub…

view full answer...

Replacement Grease Seal for Shorlandr with Manual that Calls for TCM127194TB

Product Page this Question was Asked From

Continue Researching