How to Determine Correct Replacement Grease Seal
Question:
I would like 4 double lip axle grease seals for my trailer, problem is Im not sure what size I need. Just wondering if you can cross reference my trailer and be able to get the right seal for me? Its 2011 Keystone Sprinter 308BHS. Thanks for your help!
asked by: Robert
Expert Reply:
If you have the bearing numbers and the axle capacity, we may be able to find the right seal for your trailer. If not, you will need to take an accurate measurement of the outside diameter of your existing seal, or the inside diameter of the mounting surface for the seal in the hub.
You will also need to get an accurate measurement of the spindle at the seal surface. I have attached a photo that shows the areas you will need to measure. You will need a precision instrument like a dial caliper to determine the correct grease seal for your hub and spindle.
Most likely you will need the 10-19 grease seals, # RG06-050, but I would still measure just to be sure the measurements match up. Your trailer typically uses either 3,500 lb or 4,400 lb AL-KO axles and this is the only grease seal that fits those axles.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Product Page this Question was Asked From
Double Lip Grease Seals (pair)
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Continue Researching
- Shop: Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: etrailer Class III Trailer Hitch Installation - 2023 Kia Telluride
- Shop: Trailer Hitch
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2-1/2" Hitch
- Shop: Curt Easy Mount Bracket for 4- or 5-Way Flat and 6- or 7-Way Trailer Connectors - 2" Hitch
- Shop: Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 5 on 4-1/2 - Load Range C
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Search Results: 7 way 4 way connector
- Shop: Grease Seals 10-36 (pair)
- Shop: Double Lip Grease Seals (pair)
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Video: Bearing Repacking and Grease Seals Installation
- Q&A: Single or Double Lip Seals for a Trailer with 12192TB Transcom Seals and Using Bearing Buddies
- Video: Review of Hopkins Wiring - Wiring Adapters - HM47365
- Video: Hopkins 7-Way RV to 4-Way Flat Trailer Connector Adapter Review HM47365
- Search Results: grease
- Search Results: bearing seals
- Article: Most Popular Wheel Bearings
- Q&A: Does Grease Seal Thickness Matter More than Inner and Outer Diameter
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Q&A: What Are The Torque Specs And PSI Rating For Kenda 5.30-12 Galvanized?
- Q&A: What is the Speed Rating of Trailer Tire and Wheel Combo # AM30820
- Q&A: How To Know You Have Enough Grease with Bearing Buddy Bearing Protectors for 1.98 Hub Bore
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 8-258-50UC1-EZ Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-2-G-2K Review
- Search Results: grease seal
- Video: Review of LubriMatic Lubricants Sealants Adhesives - Grease - L54FR
- Search Results: marine bearing grease
- Search Results: 10 60 seal