Recommendation of Storage Cover for Little Guy Max Tear Drop Travel Trailer

Question

Question:

Cover for little guy max

asked by: Allen R

0

Expert Reply:

I recommend the Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for R Pod Trailer Up to 16-1/2', # CA80198. This fits trailers up to 16' 6" as measured from the back bumper to the coupler at front of trailer. The PolyPro 3 fabric top provides superior weather protection with a triple-ply construction that keeps out rain and winter weather when in storage. It has integrated air vents and aippered side and rear panels to provide easy access to the doors.

expert reply by: Michael R

0

Answer 1

The Classic Accessories Deluxe PolyPro III Heavy-Duty Cover for Teardrop Trailers #CA80198 fits teardrop trailers that are up to 16-1/2-feet (including the trailer tongue) so it will definitely have plenty of room to fit easily on your Little Guy Max…

view full answer...

Answer 2

I looked up the length of your 2018 Littleguy Max and found it to be 17 foot 2 inches and since it's the R-Pod style of tear trailer the cover you'd want is the #CA80199 which will fit really well and provides excellent protection too.

view full answer...

Answer 3

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

The spacing will depend on the axle diameter and on which particular spring hanger kit you use. If you have a 6000 lb 3 inch diameter axle, and you're using the #APT5 hanger kit which includes 7-3/4 inch equalizers and 2-5/8 inch shackle straps…

view full answer...

Answer 6

Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be 29-1/2" between the front and center hangers and…

view full answer...

Answer 7

When measuring for a trailer cover you want to measure from the front of the trailer box, not the tongue, to the rear including anything that is attached to the rear. This will include a spare or a ladder at the farthest edge at the rear of the…

view full answer...

Answer 8

On equalizer 013-105-04 in kit #K71-360-00 the eye center to eye center measurement is approximately 7-1/2 inches.

view full answer...

Answer 9

It looks like most NuCamp Tab 400 trailers are roughly 219" long (18'-3") so the Classic Accessories #CA80200 would be the best available cover for your trailer. This provides good protection from UV rays and weather, plus the zippered…

view full answer...

Answer 10

Unfortunately we do not have a way to replace the keys without knowing the key number for the lock. If they happened to have written down the key number from the lock then we will be able to get you a replacement. The etrailer Trailer Hitch Receiver…

view full answer...

Answer 11

The disc brake kits like #K2R1058D13 are designed for torsion axles and disc brake rated EOH systems which have a higher 1600 psi level than drum brake actuators. This is currently the only kit we have compatible with 10K torsion axles from Lippert…

view full answer...

Answer 12

I cannot determine which rear bumper that you have from your picture so I will give you to options based on which bumper you have on your 1989 Chevrolet K3500 Crew Cab Pickup with the 8' bed. The Draw-Tite Ultra Frame Trailer Hitch Receiver…

view full answer...

Recommendation of Storage Cover for Little Guy Max Tear Drop Travel Trailer

Product Page this Question was Asked From

Continue Researching