Ramp Weight of the Yakima OnRamp # Y36FR

Question

Question:

How much does the ramp weigh?

asked by: Al B

1

Helpful Expert Reply:

I confirmed with my tech at Yakima that the ramp of the Yakima OnRamp - 2" # Y36FR weighs a super light 2 pounds. If you need a hitch recommendation for the OnRamp, feel free to respond to this answer with the year/make/model of your vehicle.

expert reply by: Bob C

1

Answer 1

I do have a bike rack that is able to transport an e-bike of this weight. The Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount, part #HLY84FR, has a maximum weight limit of 80 lbs per bike. It also has…

view full answer...

Answer 2

I have a great solution for you. Even though the independently-adjusting cradles on the Yakima OnRamp #Y36FR eliminate the need of a bike frame adapter bar, the OnRamp is not safe to use on the back of a flat-towed vehicle. I I confirmed with the…

view full answer...

Answer 3

Well look no further! We have exactly what you're needing! Thanks for sending in those photos - it takes a LOT of the guesswork out of what bike rack to recommend. For your application I recommend going with either the Yakima OnRamp #Y36FR or the…

view full answer...

Answer 4

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 5

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 6

The Tow Defender #RM-4700 you found is really our best option to protect the front of your 2024 Chevrolet Trax. This screen helps to deflect any road debris back down to the ground to keep it traveling under your Trax. This particular cover is…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

While it hasn't been tested (yet), the Yakima OnRamp #Y36FR has padded clamps to hold onto the mast of the scooter and wheel loops that could be wrapped around the base of the scooter to secure it in position. To line the padded clamps up with…

view full answer...

Answer 9

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 10

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Ramp Weight of the Yakima OnRamp # Y36FR

Featured Help Information

Miscellaneous Media

Continue Researching