2-Bike Add-On For Hollywood Racks Sport Rider SE2 Bike Rack

Question

Question:

We have a 2 bike carrier from you for our bikes: not sure if 1450z-e or 14754z-e, not sure,, We want to buy add on for 2 more bikes.

asked by: Robert A

0

Expert Reply:

If you have the Hollywood Racks Sport Rider SE2 2 Electric Bike Rack #HR1450Z-E (NLA), then the correct 2-bike add-on is the 2 Bike Add-On for Hollywood Racks Sport Rider SE2 for 2" Hitches # HR1475Z.

expert reply by: Bryce D

0

Answer 1

Yes, the 2 Bike Expansion Accessory for Hollywood Racks Sport Rider SE2 part #HR1475Z will fit your Hollywood Racks Sport Rider SE part HR1450Y.

view full answer...

Answer 2

The Hollywood Racks part #HR1475Z that you referenced is an add-on for the Hollywood Racks 2 bike rack part #HR1450Z to convert it to a 4-bike rack. This rack can be used at the rear of a motorhome but not a travel trailer. If you had basically…

view full answer...

Answer 3

I have a great bike rack solution for you, but not all bike racks are rated for the rougher ride quality at the rear of an RV. The Hollywood Racks bike racks are great racks but they are not RV rated. At the rear of a trailer or RV the ride quality…

view full answer...

Answer 4

The 24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs #63153 will work with the Yakima BackSwing Swing Away Hitch Extender for Bike Racks part #Y02483 so you are good to go. The reference to adapters has to do with carriers which have a…

view full answer...

Answer 5

I wouldn't recommend carrying carbon frame bikes on a bike rack that holds the bikes by the bike frame since this is a very delicate material. You'd be best served with a bike rack that attaches to the bikes with wheel mounts instead like the…

view full answer...

Answer 6

Even though you don't need the tilting feature like what the Hollywood Rack RV Rider part #HLY64FR has it's still your best option since it's a very solid and stable rack with enough weight capacity for your bikes and since it's also…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

2-Bike Add-On For Hollywood Racks Sport Rider SE2 Bike Rack

Product Page this Question was Asked From

Continue Researching