Mounting Options For 6-Leaf Double-Eye Leaf Springs
Question:
I just received the leaf springs to replace on my my camper. From the factory, my axles are mounted under the leaf springs, but on these, the axle centering bolt/pin are set for top mount axles. Can I simply remove the pin and put it back the other way? Thanks,
asked by: Mike B
Expert Reply:
The 6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles # e27SR should come with a pin on both the top and bottom of the leaf springs for your U-bolt plate to sit on. If for some reason yours came with a nut on the bottom then yes, you could remove the nut and bolt and flip it around to fit your application. This is a somewhat difficult and will require you to compress the spring leafs together while you remove the pin.
(click to enlarge)
Product Page this Question was Asked From
6-Leaf Double-Eye Spring for 4,500-lb Trailer Axles - 26" Long
- Trailer Leaf Springs
- Double Eye Springs
- 4500 lbs
- 1-3/4 Inch Wide
- 6 Leaf
- 26 Inch Long
- Painted
- etrailer
more information >
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Q&A: Availability of 4 Leaf Springs that are 26 Inches Long
- Q&A: Arch Height of Universal Group Leaf Spring
- Q&A: Determining Which Leaf Springs Fit 2016 Grand Design Reflection 29RS W/ 4400lb Lippert Axles
- Q&A: Recommended Replacement 26 Inch Long Leaf Spring for Trailer Upgrading Axle to 4,000 Pounds
- Q&A: Replacement Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Q&A: Recommended Leaf Springs for 4,400 lb Axle Based on Axle Position and Hanger Locations
- Q&A: Leaf Spring Recommendation for 4,400 lb Trailer Axle
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings