Why Doesn't Kuat Dirtbag Phat 9 Fat Bike Rack # DRT9P Come with Skewer

Question

Question:

Do you carry the qr skewer for this mount?

asked by: Shawn

0

Expert Reply:

The Kuat Dirtbag Phat 9 Fat Bike Rack # DRT9P does not come with a skewer nor do we supply one. You would need to use the skewer of the bike.

expert reply by: Jameson C

0

Answer 1

I went out to the warehouse and pulled the Kuat Dirtbag, #DRT9P. The overall width is 5-3/4 inches (146mm), and 5 inches between the 2 uprights (127mm).

view full answer...

Answer 2

I spoke with someone from RadRover about your forks axle length and I have one solution and I might have a second solution. My recommendation would be to get the Kuat Dirtbag Phat 9 Fat Bike Rack - Fork Mount - Bolt On - 9 mm Quick-Release Skewer,…

view full answer...

Answer 3

Yes, the Kuat Dirtbag Phat 9 Fat Bike Rack (9mmx135) part #DRT9P will work with any of the Saris Traps Fork-Block Bike Carrier Bases. They are available in a 47" long single track part #SATRK14, 35" long triple track part #SATRK33, and a…

view full answer...

Answer 4

We have exactly what you need to carry a fat bike in the bed of your 2019 Ram 1500, the Kuat Dirtbag Phat 9 Fat Bike Rack #DRT9P or the Kuat Dirtbag Phat 15 Fat Bike Rack #DRT15P. The Phat 9 Fat Bike Rack #DRT9P will work with fat bikes that have…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 9

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 10

Only certain bike racks are rated for use at the back of an RV or trailer but the Hollywood Racks #HR1400Z bike rack is not one of them. Generally, any rack that can fold or tilt, with few exceptions, won't be rated for this applications. The…

view full answer...

Answer 11

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 12

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...

Why Doesn't Kuat Dirtbag Phat 9 Fat Bike Rack # DRT9P Come with Skewer

Product Page this Question was Asked From

Continue Researching