Is There a 2" Bike Rack You Can Use with 2" Cargo Carrier

Question

Question:

I have a Stowaway2 cargo carrier and would like to know if there is a bike rack with a pass-thru hitch so I could install the bike rack, then the swingaway Stowaway2.

asked by: Jeff J

0

Expert Reply:

I do have an option for you though I'm not aware of any build your own bike rack and cargo carrier options. The capacity and leverage is simply too much for such item to be used universally with different racks and carriers. Instead, you'll need to use one unit that was designed for this exact combo, the Yakima EXO Swing Away 2 Bike Rack w/ Enclosed Cargo Carrier part # Y34ZR. This is one of the only products of its kind that lets you carry both cargo in an enclosed box and up to two bikes. You can also swap out the carriers to use all other sorts of things like ski racks etc.

expert reply by: Conner L

0

Answer 1

Yes, the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers item #Y74ZR is compatible with the 2" receiver on your 2018 BMW X1. As far as exhaust heat goes, the shank on the swing away has a 2" rise to lift the carrier up and…

view full answer...

Answer 2

To replace one of the cargo boxes on your Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers #Y74ZR with a bike rack you need the Yakima DoubleUp 2 Bike Rack #Y24VR. This is currently the only bike rack option Yakima has released for…

view full answer...

Answer 3

Our best swing away cargo box is the Yakima EXO System with 2 Enclosed Cargo Carriers, part #Y74ZR. This adds 20 cubic feet of storage to the rear of your RV and works with Class III and Class IV 2 inch trailer hitch receivers. This shouldn't…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The Stealth Hitches Hidden Rack Receiver item #391KIATELL20 you were looking at would be a great option if you do not want to see the hitch at all when you're not using your Yakima EXO system. It has been confirmed to fit the 2023 Kia Telluride…

view full answer...

Answer 7

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

We do have the panels separately. What you're looking for is the Go Power Overlander Expansion Kit - 200 Watt Solar Panel #34282182.

view full answer...

Is There a 2" Bike Rack You Can Use with 2" Cargo Carrier

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching