Recommended Trailer Hitch And Towing Equipment For A 2017 Nissan Frontier Towing A Sol Dawn Rover
Question:
My Dawn Rover has a 20.5 inch ball height What exactly is this measurement? Need to buy hitch and ball
asked by: Don S
Expert Reply:
The 20.5" ball height you referenced for your Sol Dawn Rover Travel Trailer is height that the coupler sits at. This means that you would need the hitch ball on your 2017 Nissan Frontier to be sitting at 20.5" for the trailer to ride level while you tow.
Since you need a trailer hitch for your 2017 Nissan Frontier I recommend the etrailer Trailer Hitch Receiver # e98869. This fully welded trailer hitch receiver bolts onto your Nissan Frontier's frame with no welding or drilling required. All necessary hardware for installation is included. This hitch is protected with a matte black finish for added durability and in addition to being rust and corrosion resistant, the tough matte coating also hides dirt, scuffs, and dings better than a glossy finish.
You'll also need a wiring harness to send your braking and turn signals to the lights on your trailer. If you don't already have a factory 4-pole or 7-way connector then I recommend the T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266. This harness will quickly and easily install a 7-way, RV-style trailer connector on your Nissan Frontier. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.
Additionally you may require an adjustable ball mount to get the correct hitch ball height to match your trailer's 20.5" hitch ball height. I've attached our guide on ball mounts which will have you take some measurements to find the correct rise/drop needed, but you could also just use an adjustable ball mount like the B&W Tow & Stow 3-Ball Mount # BWTS10049B.
This adjustable ball mount features a 1-7/8" Ball, 2" Ball, 2-5/16" Ball to allow you to tow multiple trailers. It adjusts up for up to a 7" rise or drop to ensure that whatever you tow will be level. It also features an anti-theft design that ensures the ball mount platform can't be removed when Tow & Stow is installed in hitch.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 7 Round - Blade
- Tekonsha
more information >
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 7" Drop, 7-1/2" Rise - 10K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- 2-5/16 Inch Ball
- Three Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 7 Inch
- Rise - 7 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- B and W
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Hitch and Wiring for 2024 Nissan Frontier
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Trailer Wiring Relay Location for 2022 Nissan Frontier
- Article: Trailer Wiring Diagrams
- Q&A: Trailer Wiring Fit For 2022 Nissan Frontier
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Which Hitches are Made in the USA
- Q&A: Trailer Hitch that Fits 2022 Nissan Frontier
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Does Thule Make Round Crossbars
- Article: Ball Mount Basics: Weight Capacity, Class, and Size