Why Does Locking Knob Keep Spinning on Thule EasyFold XT Bike Rack

Question

Question:

First time using it and I can’t get the short arm clamp to open up and release frame tube, knob just keeps spinning but clamp doesn’t release can’t get my Rad Rover 6 Plus step Thru off the rack?

asked by: Michael I

0

Expert Reply:

I'd be happy to help out! It sounds like the knob on the clamp for your Thule EasyFold XT Bike Rack # TH903202 is locked. If you unlock it then you'll be able to open up the clamp like normal.

This is a standard operation for Thule locks that are on a knob like this. It's a safety feature so that someone can't just force the lock open by forcing the knob to turn.

expert reply by: Jon G

0

Answer 1

If the knob of the Thule Spare Me part #TH963PRO will spin without tightening or loosening that means the lock mechanism is engaged and it needs to be unlock so that the knob engages the threads and will loosen. Try different key positions on the…

view full answer...

Answer 2

In regards to a Thule T2 Bike Rack, the locking knob will free spin while locked. If the lock is unlocked that is when you will feel tension when turning. This is the most common mistake we see when removing or installing the rack. If the lock core…

view full answer...

Answer 3

Once the Thule EasyFold XT 2 E-Bike Platform Rack part #TH903202 tightening pin should not be loose enough to pull out when tightened. It shouldn't be able to be pulled out once the knob is locked. However once the knob is locked with the key the…

view full answer...

Answer 4

I went ahead and reached out to my tech at Thule, and she confirmed that locking knob on the Thule EasyFold XT #TH903202 does not have a clicking mechanism to tell the user of the proper torque. You simply just tighten the rack into the hitch…

view full answer...

Answer 5

Yes, The Replacement Locking Knob #TH79JV is the correct locking knob for The Thule Easy Fold XT #TH903202. This part can be shipped into Canada. The Lock Core #TH450400 is sold separately. I attached a review video link below.

view full answer...

Answer 6

There are a couple of components on the Thule EasyFold XT Bike Rack #TH903202 that secure it to the trailer hitch so you will want to make sure that both are loosened/disengaged. First make sure the integrated anti-rattle device is completely…

view full answer...

Answer 7

You can wrap a cable lock like part #e98891 around the Thule EasyFold XT 2 E-Bike Platform Rack #TH903202 and loop it through the safety chain loops on your trailer hitch but if someone is determined enough to drill out locks then they will likely…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 11

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 12

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...