Can Yakima Bedrock Fit 2021 Nissan Titan with Utility Track

Question

Question:

Hello, Will this work with a 2021 Nissan Titan bed with the utility tracks in the bed? Will the Yakima clamps work with utility tracks being there? Thanks

asked by: Derek G

1

Helpful Expert Reply:

The Yakima Bedrock part # Y01160-59 that you referenced does fit your 2021 Nissan Titan that has the factory utility track. I attached a picture that shows it installed with the track in place for you to check out as well.

expert reply by: Jameson C

1

Answer 1

I spoke with a representative of Thule, who told me that they did not classify the 450 lb weight capacity of the Thule XSporter #TH500XT as either static or dynamic and that you only needed to have a capacity of less than 450 lbs and you would be…

view full answer...

Answer 2

I spoke with my contact at TracRac and she confirmed for me that all of the ladder racks that fit the 2013 Toyota Tundras carry over and fit the 2014 Tundras. If you have the deck rail system you would want the Thule Ladder Rack part #TH500XT.

view full answer...

Answer 3

Yakima does have just the Tonneau Cover Adapter Kit of the Overhaul HD #Y01151-5955 you referenced available with the part #Y01155.

view full answer...

Answer 4

The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XT is adjustable up to 27 inches. This is an overall height adjustable measurement. I measured one that we had on hand, and this measurement is from the top of the base assembly…

view full answer...

Answer 5

Unlike the Tacoma, the Thule #TH500XTB won't require an adapter in order to work with the bed rail system. For the Tundra the rail system would need to be removed first, then the #TH500XTB for black or #TH500XT for silver would easily install…

view full answer...

Answer 6

I do have an option for you but the Thule Xporter Pro Ladder Rack is not compatible with a 2018 Toyota Tundra with the Deck Rail System. That said, we do offer a similar style of adjustable upright ladder rack that is a confirmed fit in the Yakima…

view full answer...

Answer 7

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 11

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 12

For your setup I recommend the TrackTowers for Yakima Crossbars and Platforms - Track Mount #Y52AV which includes everything you need to mount Yakima crossbars to your Retrax cover (unless you plan on using the Round or HD bars - then you'll need…

view full answer...

Can Yakima Bedrock Fit 2021 Nissan Titan with Utility Track

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching