Does this lock work with Prius 3rd gen 2010 OEM key?

Question

Question:

Prius 2010 has rectangular OEM key which is different from Toyota Truck or Big Suv. Does it work?

asked by: K. S

1

Helpful Expert Reply:

Yes, the key you reference from your 3rd gen Prius (2010-2015) will work with the BOLT Trailer Hitch Receiver Lock # BL7023629. This product will fit Toyota Prius model years, 2001-2014.

expert reply by: Bryce D

1

3rd Gen Toyota Prius Key
(click to enlarge)

Answer 1

Well, it worked! I even had another guy come over and give it a read. It is possible that the many years of pushing and pulling on your balls have enlarged the hole they fit in causing the movement you are experiencing. You could disassemble the…

view full answer...

Answer 2

Since your 2013 Jeep Wrangler JKU Sport only has a 4-flat connector you're going to need another wiring harness. To add a 7-way connector to control your trailer brakes with the Redarc Tow-Pro Elite item #RED44FR you will need the Universal…

view full answer...

Answer 3

The best front mount hitch available for your 2019 Toyota Tacoma TRD is the Curt #C31075. This particular hitch will still require you to trim the skid shield to allow for the needed clearance but unlike the Draw-Tite alternative it will allow you to…

view full answer...

Answer 4

For your 2019 Toyota Tacoma the only front hitch we offer has tow hooks on them, the Curt #C31075.

view full answer...

Answer 5

I recommend going with the Curt Front Mount Trailer Hitch Receiver #C31075 for your 2021 Toyota Tacoma because it will be easier to install and has the same line pull rating as the Draw-Tite #65070. The only reason I would recommend the Draw-Tite…

view full answer...

Answer 6

Out of the two front mount hitches for your 2019 Toyota Tacoma the Curt Front Mount Trailer Hitch Receiver item #C31075 is the best option for your application. It does require trimming of the front fascia and the skid guard if your model has one.

view full answer...

Answer 7

When installing Curt front mount receiver #C31075 it is just the air dam that will need to be trimmed on the 2016 Toyota Tacoma. I have included a picture that shows where the trimming needs to occur. I have also linked the instructions for you.

view full answer...

Answer 8

We do carry a Curt hitch that will fit your 2020 Toyota Tacoma perfectly, which is the following: - Curt Trailer Hitch Receiver #C13264 This will fit all models of '20 Tacoma, and if you were also looking to do some towing with your truck and…

view full answer...

Answer 9

I have attached for you below an install video of the Curt Trailer Hitch Receiver part #C13264 on a 2016 Toyota Tacoma. The front two attachment holes require fishwiring. This is standard procedure for hitch installation but the Tacoma can be tricky…

view full answer...

Does this lock work with Prius 3rd gen 2010 OEM key?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching