What Brand and Color Grease is Used on the 13511 CE Smith Trailer Hub Assembly

Question

Question:

The CE Smith 13511 hub is pre-greased with heavy-duty, marine-grade lubricant. For service information what is the manufacture name, part # and color of the grease used?

asked by: David L

0

Expert Reply:

I reached out to CE Smith and found that they use Kendal grease on the CE Smith Trailer Hub Assembly # CE13511. The grease color they use is the red grease like # L11390, although they did say it is possible it may be tan but it is the same thing.

expert reply by: Robin H

0

Answer 1

According to the MSDS sheet I looked up online for the Citgo calsuplex mp heavy marine grade wheel grease, it is a Calcium Sulfonate type grease. It can be mixed with polyurea grease, such as part #L11465. It can also be mixed with a lithium complex…

view full answer...

Answer 2

On a hub like the CE Smith Trailer Hub Assembly #CE13511 with a grease zerk on the hub you will remove the grease cap. You will then use your Grease Gun #L30416 to fill the hub with Grease #L11390 until you see it filling the entire hub and covering…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

The LMX red grease like the Lubrimatic LMX part #L11390 that you referenced is what I recommend. This is perfectly compatible with the Lithium based grease your hubs have in them now and is considered to be the most heavy duty option available. Using…

view full answer...

Answer 5

The Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles part #84545UC1-EZ is for a single hub. You may consider the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles part #CE13511 this is the same type hub with a slightly…

view full answer...

Answer 6

The CE Smith Trailer Hub Assembly #CE13511 does use the same Inner Bearing #L68149 and Outer Bearing #L44649 as the ShoreLand'r Hub 4470400. This will work as a replacement for your ShoreLand'r model 2016 LUXR2314S7MH.

view full answer...

Answer 7

Yes, the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles #CE13511 is ready to be installed right out of the case. It is pre-greased which includes the bearings so there is no need to pack them when you first install the hub.

view full answer...

Answer 8

Yes, the CE Smith Trailer Idler Hub Assembly #CE13511 is compatible with the spindles on your Trailstar boat trailer since it uses the same bearings #L68149 and #L44649. It will fit your wheels with the 5-on-4-1/2 bolt pattern. This spare hub kit…

view full answer...

Answer 9

For your boat trailer that uses the Replacement Trailer Hub Bearing #L68149 inner bearing, and the Replacement Trailer Hub Bearing #L44649 outer bearing, you can use the CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles #CE13511 for a…

view full answer...

Answer 10

Using the gasket product is not really necessary, as the 10-36 double lip seal will do a good job of keeping the grease in its place unless the hub is being overfilled with grease. If you are dealing with a idler hub with no brake assembly or brake…

view full answer...

Answer 11

The CE Smith hub part #CE13511 is exactly the hub you need as a spare. It matches the bearings and grease seal inner diameter so it would fit and work great. It also comes pre-greased.

view full answer...

Answer 12

Polyurea is in the wheel bearing grease and is compatible with marine bearing grease but not the Red grease. Red grease is compatible with marine grease but not standard. I attached a help article that has a chart with all of the grease…

view full answer...