Recommended Replacement For A KLI 9000 RV Propane Regulator

Question

Question:

I am reading your responses to the subject question. However, my configuration may be a bit different, but Im not sure. My failed KLI 9000, located on the passenger side of my 2014 Heartland Landmark feeds the dual, auto switchover regulator on the drivers side. Thus, when the passenger side 40# propane tank is online, it will provide propane for the stove, reefer, hot water heater, and furnace. I note the replacement regulator recommended is the CAM59013. The KLI 9000 is rated at 30 psi on the downstream side, but I cannot find a BTU rating to make sure it will provide sufficient flow. Can you help me make sure the CAM59013 will indeed be sufficient? Thank you!

asked by: Bruce G

1

Helpful Expert Reply:

I was unable to find the BTU rating for your KLI 9000 regulator but can assure you that the Camco Single Stage Propane Regulator # CAM59013 with a BTU rating of 200,000 is likely going to be far more than you'll need for your stove, refrigerator, water heater, and furnace. This regulator has our highest single stage regulator BTU rating.

expert reply by: Kevin C

1

KLI 9000 Regulator
(click to enlarge)

Changeover Regulator
(click to enlarge)

Answer 1

You can use the Camco Single Stage Propane Regulator - 200,000 Btu/Hr #CAM59013, which is a fairly standard replacement regulator and will work well to replace your KLI 9000 since it is designed for low pressure items as it maintains a constant…

view full answer...

Answer 2

There is a 5th wheel wiring harness for your 2020 Chevy Silverado that was designed to fit perfectly in the factory cut out in your truck bed. The harness you need is the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness #HM54FR. I…

view full answer...

Answer 3

I would recommend going with a single regulator just so you don't have to ever worry about the capped off portion. Dual tank regulators are designed to switch off the empty tank when it's empty but a single tank regulator will be the…

view full answer...

Answer 4

We don't have a similar regulator that has the 1/4 inch and out like the Camco #CAM59013 that you referenced. I wish we had a reducer/adapter that would convert this properly but since we do not you'd have to source that elsewhere.…

view full answer...

Answer 5

The SAE number you provided in your question isn't always the most accurate way to determine a correct replacement assembly. This is simply because it does not refer to the actual light part number, but to various safety guidelines that it…

view full answer...

Answer 6

The entire lamp assembly that goes with the #A44RB lens you specified is part #MC44RB.

view full answer...

Answer 7

The trailer hitch I recommend for a 2023 Hyundai Tucson is the Curt Trailer Hitch Receiver part #C94WR which I confirmed as a fit with Curt for all models, including the Hybrid. This trailer hitch features a bolt-on installation so there is no…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

I would be happy to help clear up the confusion. The hybrid part doesn't really matter what's important is the panoramic sunroof part and you having the flush mount rails that run along the sides of the roof. To add a roof rack to your 2023…

view full answer...

Answer 10

Yes, it is! The etrailer Hitch item #e38KR is confirmed to fit the 2023 Hyundai Tucson Hybrid. It is custom fit and bolts to your Tucson with included hardware. This is a class III hitch with a 2" receiver so it will work with most cargo…

view full answer...

Answer 11

I saw you were looking at some Thule parts which is why I recommended it over a Yakima and we had an installation video. If you are interested in a Yakima roof rack for your 2023 Hyundai Tucson with a panoramic sunroof you will need the following…

view full answer...

Answer 12

Hello again Michelle. The Saris Glide EX Bike Rack #SA774 will indeed fit a 2023 Hyundai Tucson with a class 3 hitch. The tilt feature will allow the hitch to open and close normally. Saris bike racks are definitely good quality. They are all made…

view full answer...

Recommended Replacement For A KLI 9000 RV Propane Regulator

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching