Can The Bolt Trailer Hitch Receiver Lock Be Keyed To The Glove Box Key On a 2015 Ford F-150 Keyless?

Question

Question:

My F-150 2015 has keyless ignition. I do have key for glove box and center console. Will this work with glove box key?

asked by: Jim C

1

Helpful Expert Reply:

Yes, the BOLT Trailer Hitch Receiver Lock # BL7023585 will key to your glove box key for your 2015 Ford F-150. This is actually the preferred key to use with the lock as the key that is built into the key fob can occasionally be difficult to use especially the first time the key is programmed.

expert reply by: Bud M

1

Answer 1

Yes the Bolt hitch lock part #BL7023585 does fit your 2020 Ford F-350. If you are unsure then you can check the attached picture that shows all of the key styles it fits.

view full answer...

Answer 2

The usable span of the Bolt Hitch Lock part #BL7023585 that you referenced is a little over 3-1/2 inches. If you check out the picture I attached you'll see all of the dimensions of the lock. This lock is intended for use with 2-1/2 inch hitches…

view full answer...

Answer 3

Unfortunately, you can't. The BOLT Trailer Hitch Receiver Lock #BL7023585 that you have is permanently code to only 1 specific vehicle/key. They cannot be re-coded or re-keyed, the locks will only work with the original vehicle/key.…

view full answer...

Answer 4

It sounds like you're in need of a locking hitch pin for your 2019 Ford F-250 Super Duty, and there are some really great options available. I recommend using the BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to…

view full answer...

Answer 5

Our hitch locks have the same capacity as a standard hitch pin. If you are worried about strength you could go with a stainless steel model like part #e98882, but since your hitch capacity is 6,000 pounds, part #e99039 would be fine. It takes quite a…

view full answer...

Answer 6

I recommend the B&W Tow & Stow 3-Ball Mount #BWTS30049B for your 2022 Ford F-350 Super Duty. This ball mount fits your 3" receiver without any adapters needed. It includes 1-7/8", 2" and 2-5/16" hitch ball sizes giving you…

view full answer...

Answer 7

The Taylor Made T-Top Electronic Box #36983558 weighs a total of 32 pounds.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Can The Bolt Trailer Hitch Receiver Lock Be Keyed To The Glove Box Key On a 2015 Ford F-150 Keyless?

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching