Can a Trailer Wiring Harness for a 2013 Honda CR-V be Mounted Outside of the Vehicle
Question:
Is there an option to mount the harness connection on the hitch area, so the wires doesnt have to go through the hatch?
asked by: Chris
Expert Reply:
It is possible that you route the 4-Way end of the wiring harness through the bottom of the cargo area in your 2013 Honda CR-V. You will need to remove as much of the cargo area flooring as you can. The goal is to get to the metal of the cargo area floor.
Then you will need to look for some sort of grommet or exit point of some kind. If you find one but it is not large enough to push the 4-Way through you will have to cut off the 4-Way, route the wiring through the hole, then splice the wires back together on the outside of the vehicle.
If there is no grommet or exit point you will have to drill a hole. No matter how you get the wiring to the outside of the vehicle you will need to seal up the hole with silicone to keep out moisture and fumes.
You can then use mounting bracket # 18144 with extension # 18140 or # C57202 to provide a bracket for the 4-Way.
Products Referenced in This Question
No-Drill Mount for Electrical Mounting Bracket - Short
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Flat
- 5 Flat
- 4 Round
- 5 Round
- Tow Ready
more information >
Curt No-Drill Bracket for 6-Way or 7-Way Round Trailer Connector Mounting Bracket - Long
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 6 Round
- 7 Round
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Article: Flat Towing Package for 2012-2014 Honda CR-V
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: What is the Size of the Bolts that Attach to My Frame from the Draw-Tite Hitch # 75742?
- Article: Trailer Wiring Diagrams
- Q&A: Is There an Alternative to Connecting a T-One Trailer Wiring Harness to 2020 VW Tiguan Battery?
- Q&A: Both Blinkers on With Wiring Harness 118811
- Q&A: Help Locating Connection Points For Trailer Wiring Harness For 2020 Volkswagen Tiguan
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can A 2015 Honda CRV Pull A 5 x 10 Trailer
- Q&A: Recommended Hitch and Wiring for 2014 Honda CR-V to Tow 700-lb Mower on Trailer
- Article: Best Bike Racks for Electric Bikes