Replacing an Actuating Coupler on a Magic Tilt Boat Trailer with a Standard Straight Tongue Coupler
Question:
magic tilt TALS 2252 coupler replacement I replaced the axles on the referenced trailer. the boat I own is light for this trailer and I did not put brakes on one of the axles as it originally had. I need to remove the PG1088 coupler that came on it with a standard straight coupler with no brake actuator. what do you recommend on a 3x4inch tongue?
asked by: Talbert
Expert Reply:
We have many standard straight tongue couplers that will fit your 3 inch x 4 inch trailer tongue. I have attached a link to all of our straight tongue couplers for you to check out. You can simply select the weight capacity that you need and the hitch ball size to choose the correct coupler.
One coupler you may be interested in is the Fulton Fast-Lok Coupler, # F346000301. This coupler uses a 2 inch hitch ball, has a 6,000 lb weight capacity and will fit on your 3 inch wide tongue. It can also be bolted to the frame and does not require welding.
From the information I could find on your PG1088 coupler, it could be bolted or welded to your trailer. If it is bolted, then it should be easy to remove. If it is welded, then it will have to be cut off. Once you have the old coupler removed, you can weld or bolt on a new standard coupler.
Product Page this Question was Asked From
Fulton Fas-Lok Coupler - 2" Ball - 3" Channel - 6,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 6000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- Fulton
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: axle block
- Shop: 4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Shop: 4-Leaf Slipper Spring w/ Flat End for 3,700-lb Trailer Axles - 30" Long
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Shop: Yates Ribbed Wobble Roller - TPR - 5" Diameter - 7/8" Shaft
- Shop: Replacement Hardware Kit for CE Smith Post-Style Guide-Ons
- Shop: Dexter Zinc-Plated, Leverlock Coupler - 2" Ball - 3" Channel - Bolt On - 5,000 lbs
- Shop: Replacement Mounting Hardware for CE Smith Roller-Style Guide-On
- Video: Titan Brake Actuator T4395100 Review
- Video: Kodiak Trailer Brakes BH-X-3FIF Review
- Video: Dexter Zinc-Plated, Leverlock Coupler Review
- Q&A: Troubleshooting Hydraulic Trailer Brakes Not Working Properly Even When Lines are Free of Air
- Q&A: Replacement Master Cylinder For Titan Model 60 W/ 23361 Master Cylinder
- Shop: Kodiak Cross Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares
- Search Results: trailer brake hose
- Search Results: 2 inch ball coupler
- Search Results: swing away trailer tongue
- Q&A: Determining Replacement Wheel Stud for Magic Tilt Trailer RD19 2100
- Search Results: trailer tounge
- Video: CE Smith Boat Trailer Parts CE11451-A Review
- Q&A: Trailer Wiring Has 5-Wires White, Yellow, Green, and 2 Browns
- Q&A: How Do I Wire Utility Trailer that has 2 Yellow and 2 Green Wires
- Search Results: bow roller
- Search Results: bow guard
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Wiring
- Article: Trailer Tire Sizing
- Shop: Suspension Enhancement
on Straight Tongue Trailer Coupler
