Will the SaltDogg Electric Hitch-Mount Salt Spreader Work with Sand

Question

Question:

Can this spread sand

asked by: Y

0

Expert Reply:

The SaltDogg Electric Hitch-Mount Salt Spreader part # 337TGSUV1B won't work with sand but we do have an option that will work with a salt/sand mix, the SaltDogg Electric Tailgate Salt Spreader part # 337TGS07 but it does however require a pickup.

expert reply by: Conner L

0

Answer 1

I have a solution for you but the SaltDogg Electric Hitch-Mount Salt Spreader item #337TGSUV1B can only be used with dry-bagged #1 free-flowing rock salt or refined sodium chloride. I verified this information with the manufacturer. The weight of the…

view full answer...

Answer 2

I checked with SaltDogg and the harness of the SaltDogg Electric Hitch-Mount Salt Spreader #337TGSUV1B is 279 inches long.

view full answer...

Answer 3

The SaltDogg Electric Hitch-Mount Salt Spreader for 2" Hitch - Gravity Feed w Auger #337TGSUVPROA and the SaltDogg Electric Hitch-Mount Salt Spreader for 1-1/4" or 2" Hitch #337TGSUV1B have a few differences. The #337TGSUVPROA has a…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 9

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Will the SaltDogg Electric Hitch-Mount Salt Spreader Work with Sand

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching