Go Power Heavy-Duty Modified Sine Wave Inverter and Lithium Chemistry Battery Bank

Question

Question:

Does this unit have a lithium setting?

asked by: Perry D

1

Helpful Expert Reply:

Inverters such as the Go Power Heavy-Duty Modified Sine Wave Inverter, # 34280179 draw from the battery bank. They do not care what chemistry the battery bank is only that it is supplying the correct voltage.

If you are looking for a combined inverter/charger, such as the Go Power Industrial Pure Sine Wave Inverter Charger, 2,000 Watts & 100 Amps - 12V, # 34280055, then you would need to be concerned with matching the battery bank chemistry to the charger. This model is compatible with sealed/gel, AGM, flooded/wet cell, and lithium batteries.

expert reply by: Michael R

1

Answer 1

It truly depends on how much wattage you need and how much electronics you need powered in your Fleetwood Expedition 38n. For example, if you have multiple appliances, I recommend the Go Power Heavy-Duty Modified Sine Wave Inverter #34280179. This…

view full answer...

Answer 2

Yes, as long as your 2017 Ford F-250 is a Crew Cab with front row bench seat the Weathertech mat #WT4410123 will fit regardless of if you have carpet or a vinyl floor.

view full answer...

Answer 3

No, the Progressive Dynamics 1800 Watt Inverter w/ Transfer Switch #PD44FR requires a sub panel regardless of what you're powering. The AC circuit breaker you're referencing wouldn't have power unless you were connected to shore power,…

view full answer...

Answer 4

Per the Installation and Operation Guide for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch, #PD44FR it references using Romex and pushing the conductor into place. This states using lugs instead of ring terminals. I suggest…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

The Progressive Dynamics Replacement Section #PD4655V does have a jumper to change the charging profile to lithium compatible. You'll simply need to move the black jumper over from the WIZ side to the LI side.

view full answer...

Answer 8

I've attached the installation instructions for the Progressive Dynamics Pure Sine Wave Inverter w/ Transfer Switch - Remote - 2,000 Watts - 12V #PD64FR for you below.

view full answer...

Answer 9

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 12

To replace your converter you have two options: Option 1: Completely replace the converter and AC/DC distribution panel. You could use a power center like the #PD4135K or a larger one if you'd like a higher amperage converter and more AC circuit…

view full answer...

Go Power Heavy-Duty Modified Sine Wave Inverter and Lithium Chemistry Battery Bank

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching