Availability of Replacement Door for Phoenix Faucets Super Slider Sewer Hose Storage Tube

Question

Question:

Do you have the replacement door ONLY for the Phoenix Faucet Super SliderSewerHoseStorageTube PF247010?

asked by: Richard J

0

Expert Reply:

The PF247010 replacement door you're referencing has been discontinued. In order to replace the door on your Phoenix Faucets Super Slider Sewer Hose Storage Tube you will need the Replacement Cap and Saddle for Valterra Adjustable Sewer Hose Carrier - Black - Qty 1 # A04-0448BK which replaced the D&W Inc PF247010. There is also a white version available # A04-0448.

I have attached some review videos for your reference.

expert reply by: Robin H

0

Answer 1

The Replacement Cap and Saddle for Valterra Adjustable Sewer Hose Carrier - Black - Qty 1 #A04-0448BK you need for your Valterra Sewer Hose Carrier are just slid on the carrier and held on by friction. To get them off you will just need to hold the…

view full answer...

Answer 2

The Valterra Carrier #A04-3460BK tube can telescope from 34-60 inches to accommodate a variety of hose lengths. Since 10 feet of just the RhinoFLEX Hose #CAM39671 compresses to 32 inches you will need a bigger hose carrier. I recommend going with…

view full answer...

Answer 3

The Valterra Dominator RV sewage hoses such as #D04-0200 and #D04-0205 have 3-inch bayonet and 3-inch swivel fittings on their two ends. The Camco RV Sewer Hose Storage Cap Set #CAM39753 will work on the bayonet end but the elbow cap will not. I…

view full answer...

Answer 4

The cap unfortunately is not available for replacement so if you need a new cap for your Valterra Bumper Mounted Carrier for EZ Coupler Sewer Hose Fittings and Adapters #VAL53VJ your options are to either purchase an entire new carrier or create a…

view full answer...

Answer 5

If you look at the third bracket you can see that it wraps around the tube far enough to actually hold it and not just let it fall. The tube's overall weight is pretty low so it would not want to just fall out.

view full answer...

Answer 6

The EZ Coupler Cap #F02-3106CL has 4 tabs that will fit over the 4 lugs on the sewer drain valve. It does have a 3/4" male thread hose coupler that will allow you to drain your gray water tank without needing your larger sewer hose. It is…

view full answer...

Answer 7

The Valterra Replacement Cap #A04-0448BK has an inside diameter of 4-3/4-inches. We measured one to confirm. So the pipe it will fit properly will have an outside diameter of approximately this same size.

view full answer...

Answer 8

The RV Sewer Adapter #F02-3103 is used with the EZ Flush Replacement RV Sewer Hose #D04-0013 to connect at the dump station. This adapter threads onto the hose and includes the end to fit 3" slip and 3", 3-1/2", and…

view full answer...

Answer 9

I do have a similar option for you but the only length we offer the D&W Inc Super Slider Sewer Hose Carrier and Storage in is 33"-60". For a similar products that will expand from 50"-94", I recommend using…

view full answer...

Answer 10

If you are using the most common type dump hose out there, perhaps different in appearance but size wise, the same that almost everyone else at the camp site has, then yes. The EZ Coupler 4-in-1 RV Sewer Adapter with 90-Degree Elbow Fitting,…

view full answer...

Answer 11

The Camco RV Sewer Hose Storage Caps for Bayonet and Elbow Fittings #CAM39753 are the same ones that come with the RhinoFlex hoses, such as #CAM39761, as an example so they would work with a RhinoFlex Extension. But I would use #CAM39463 on the…

view full answer...

Answer 12

The Valterra Replacement Cap #A04-0448BK has an inside diameter of 4-3/4-inches. I measured one to confirm. So the pipe it will fit properly will have an outside diameter of approximately this same size.

view full answer...